Jump to content


Photo
- - - - -

Project 'left Overs'


  • Please log in to reply
326 replies to this topic

#316 apbellamy

apbellamy

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,001 posts
  • Location: Rotherham

Posted 30 June 2011 - 12:37 PM

174 BHP, 178 lb/ft @ 17psi.



The redish line is 17ish psi on the bleed valve, the green is actuator boost (7psi)

Power and torque at the flywheel:

Posted Image

Power and boost at the wheels:

Posted Image

Power and AFR:

Posted Image

Posted Image
Posted Image

That'll do. Pig.

Edited by apbellamy, 30 June 2011 - 02:26 PM.


#317 james962

james962

    Up Into Fourth

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 2,677 posts
  • Location: Banbury

Posted 30 June 2011 - 02:12 PM

Brilliant! I bet you're please with that :unsure:

#318 apbellamy

apbellamy

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,001 posts
  • Location: Rotherham

Posted 30 June 2011 - 02:18 PM

:unsure:

#319 apbellamy

apbellamy

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,001 posts
  • Location: Rotherham

Posted 03 July 2011 - 04:25 PM

Got the front shockers fitted today (only had them 3 years). Hopefully they will help with the torque steer.

Also got the interior stripped out and fitted an old bucket seat to a metro subframe.

Posted Image
Posted Image

We reckon we've taken around 55-60KG's out so hopefully that will make bit of a difference on the strip. I don't envy John driving it down to Avon. :)

#320 Racer_Pete

Racer_Pete

    Up Into Fourth

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPip
  • 2,492 posts

Posted 03 July 2011 - 06:47 PM

nice result lads, saw it at mitp last year going down the strip, was even quick then let alone what its going to be like now.
quick question, at what rpm did your t3 used to boost at?
cheers.

Edited by Racer_Pete, 03 July 2011 - 06:48 PM.


#321 apbellamy

apbellamy

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,001 posts
  • Location: Rotherham

Posted 03 July 2011 - 07:26 PM

About 3.5k - 4k

Edited by apbellamy, 03 July 2011 - 07:28 PM.


#322 bennyy

bennyy

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 60 posts

Posted 03 July 2011 - 09:01 PM

my t3 see's a little boost at 3,500rpm, but doesnt reach full boost till 4K

#323 John H

John H

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 768 posts
  • Location: Barnsley, South Yorkshire

Posted 04 July 2011 - 10:16 AM

And as you can see from the new graph's we now see 6psi at 3000rpm

#324 John H

John H

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 768 posts
  • Location: Barnsley, South Yorkshire

Posted 04 July 2011 - 09:38 PM

Given it a little fettle tonight.

Weighed new seat it saves us 5kg over the original. Also lost about another 5kg with tactical use of the chisel and angle grinder.

Also rigged up a cold air feed to the air filter and installed a little valve so we can turn the part throttle lean off on/off. Should save us some fuel when pootling round on low boost.

#325 Steve Rowe

Steve Rowe

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 482 posts

Posted 04 July 2011 - 10:29 PM

Sorry for going back to the start of your topic , but i see you towed your metro home on an A-frame ? have you had any bother with the law doing that ? i ask because i used to do it alot , but got stop and told the car has to have tax/mot/insurance to be on the frame and A-frames are only ment to be used for recoving cars/vans short trips ,like removeal from a motorway ?? its such a grey area

#326 John H

John H

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 768 posts
  • Location: Barnsley, South Yorkshire

Posted 05 July 2011 - 07:04 AM

Definately a grey area. We do have a trailer now and generally only use the a-frame for recovery purposes.

#327 John H

John H

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 768 posts
  • Location: Barnsley, South Yorkshire

Posted 11 July 2011 - 12:16 PM

13.9 @ 104mph this weekend at the showdown!




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users