848 replies to this topic

[liam-ds]

Why does everyone use a Red Bull can?! Use your imagination people!

not everyone uses a red bull can ive used a john smiths can

[NZDraughty]

 10_08_08_007.jpg   125.18K   137 downloads
Here's mine as it sits in my garage at the moment, few minor things like radiator & carb to go in yet

[Risky]

Here's mine, nothing very special but still like it!

Peco inlet manifold, HS4 carb, K&N cone filter. 998cc engine painted gold and rocker cover painted black with chrome oil cap.
Radiator painted black and removed the paint from the top of the radiator and polished it.

I have some plans to make it look nicer (small chrome things etc.) but for now it's good enough for me

[M44K TS]

Updated shot of mine.

[march717]

An updated one now its finished

What the hell is going on with your radiator top hose? What is that thermo housing from? Never seen anything like that before, is that rad in backwards or something?

I moved the top hose to the other side of the rad as i didn't want the long top hose , i bought a standard rad and made some ally end tanks and made it double pass so i could have both pipes on one end
the thermostat housing is a modded mpi one

[march717]

An updated one now its finished

Hi, Looks good.

Could you give me some info on the carbon look air intake you have please?

Many thanks

Steve

Thanks steve
I got a carbon skinning kit from carbonmods in stoke and did the air intake the wiper cover and the relay box i am also doing the alternater cover but its not finished yet
it doesn't look quite as good as it should as i need a bit more practice/patience to get it right

[JamesGodfrey1992]

This is the finished kit.

If there is enough interest I will make an inlet and have a limited run of copies made for people who want them.
I'm not looking to proffit so all costs would be shared by each unit 9more ordered the cheaper they will be)
Let me know guys

hi, do still make the kit.. i am extremely interested.

[shaun617]

This is the finished kit.

If there is enough interest I will make an inlet and have a limited run of copies made for people who want them.
I'm not looking to proffit so all costs would be shared by each unit 9more ordered the cheaper they will be)
Let me know guys

hi, do still make the kit.. i am extremely interested.

i want one also

[ghostleader101]

This is the finished kit.

If there is enough interest I will make an inlet and have a limited run of copies made for people who want them.
I'm not looking to proffit so all costs would be shared by each unit 9more ordered the cheaper they will be)
Let me know guys

hi, do still make the kit.. i am extremely interested.

i want one also

Same here looks awsome, i wanted to make one for mine but this looks amazing

[Mini Mad Drakeley]

can some one please tell me where to get those extremely awesome lookin carbon fibre rocker covers and those solenoids, do you just put a can over them or can you just buy them with whatever design?
and if i wasnt keeping my mini as original as possible i would also be very interested in that kit cus that looks cool

[garrett3]

Hi Guys

The Coil cover as I think you are refering to is just a chromed one from a vw beetle shop on ebay. Cost me £7 inc the bracket.
Tried to find you guys a link but It was a long time ago now and I cannot find them.

The intake kit wont be made as I would need 50 orders minimum to be able to get the intake chambers produced cheap enough to make it viable even without charging a penny for proffit.

The kit if I had 50 orders would be £98 and for 100 would be 91. so not cheap at all.

Sorry guys

[ghostleader101]

Heres mine, not that good atm and not a whole pic of it, dont have one yet :L fitting a stage 1 kit so will take another one after that

 Image0275.jpg   640.68K   20 downloads

[mini_blue]

Soon to be changing to orange instead of the blue. If I can find Orange high temp paint !!

Attached Files

•  mini2.jpg   91.37K   134 downloads

[sam27]

heres mine

Attached Files

•  Image0442.jpg   1.14MB   44 downloads

[buck]

Where do some of you get the kits to put such large air filters in with the tubing - is this DIY simmilar to garrets?