Seats That Fit In The Classic Mini
#196
Posted 04 September 2009 - 06:38 PM
880mm high, 500mm wide and 635mm deep. (Take all dimensions to be +/- 10mm!) From the front of the backrest to the front edge of the seat is approx 500mm. From the bottom of the headrest to the bottom of where the backrest meets the seat iis approx 575mm.
Advice appreciated as I have been offered a pair in black for cheap and they include built in Headrest Speakers too, I hate my current bucket seats and would like something a bit more refined/comfy.
#197
Posted 09 September 2009 - 06:06 PM
Attached Files
#198
Posted 10 September 2009 - 01:18 PM
http://i173.photobuc...100909_1238.jpg
http://i173.photobuc...0909_123801.jpg
the top of the rear seats needed cutting so thats why theres no cover on it. all i did was cut it into a rectangle and it fits well, although it stick up a few inches above the parcel shelf. and theres gona be absolutely no space for passengers unless they have no legs. oh well
Edited by JA50N, 10 September 2009 - 01:18 PM.
#199
Posted 22 September 2009 - 04:29 PM
Would these version of the MX5 seats fit in a Mini ?
880mm high, 500mm wide and 635mm deep. (Take all dimensions to be +/- 10mm!) From the front of the backrest to the front edge of the seat is approx 500mm. From the bottom of the headrest to the bottom of where the backrest meets the seat iis approx 575mm.
Advice appreciated as I have been offered a pair in black for cheap and they include built in Headrest Speakers too, I hate my current bucket seats and would like something a bit more refined/comfy.
yes, these will fit- i've got them in mine
Attached Files
#200
Posted 05 October 2009 - 10:50 PM
#201
Posted 07 October 2009 - 08:44 AM
Hi i might be buying soime rover 220 seats, just wondering how they would fit in? what i would need to buy for them to fit. of can they be fitted to the standard mini subframe?
I have just put 220 coupe seats in mine.
You will need to make a bracket to fit the butterfly clips in the mini and for the back i have fitted them to a 40mm x 20mm steel box section, thay is secured under the existing seat hoop and than bolts directly to the seat rail.
Edited by mymini007, 07 October 2009 - 08:47 AM.
#202
Posted 07 October 2009 - 09:29 AM
Link:http://www.theminifo...x...9065&st=120
#203
Posted 10 October 2009 - 03:27 PM
#204
Posted 10 October 2009 - 10:16 PM
Edited by JamesGodfrey1992, 10 October 2009 - 10:16 PM.
#205
Posted 19 October 2009 - 12:59 PM
the recaros from escort rsts also fit in a mini, they are similar to the Corbeau GTS but made by recaros, they are very comfy. wel they are in my bedroom! but theyll def be nice when there in!
I have a ford recaro, trying to find a frame to fit it, what frame are u using?
Ta
#206
Posted 28 October 2009 - 04:30 PM
#207
Posted 12 November 2009 - 03:48 AM
#208
Posted 06 December 2009 - 07:37 PM
how about Acura RSX seats? do you think they would fit?
#209
Posted 06 December 2009 - 07:54 PM
here are the resuts after fitting today
Attached Files
Edited by luiji89, 06 December 2009 - 07:56 PM.
#210
Posted 07 December 2009 - 06:28 PM
they were just welded to the floor at one side and bolted through the floor at the other
bit of a bodge in this example, but theyre leather and really comfy.
im using them as seating in my room at the moment
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users