4 replies to this topic

[524jus]

Hi does anyone know what you have to do in terms of studs & spacers to get 10 inch Rose petal alloys  to look correct/ fit flush with Group 2 arches. 

 

Thanks

[whistler]

Hi does anyone know what you have to do in terms of studs & spacers to get 10 inch Rose petal alloys to look correct/ fit flush with Group 2 arches.

Thanks

[whistler]

You don't need arches for 10" Rose Petals.

Edited by whistler, 11 May 2024 - 02:20 PM.

[stuart bowes]

I think what s/he means is how to make those wheels stick out more so they DO fill the arch

Edited by stuart bowes, 11 May 2024 - 03:41 PM.

[timmy850]

Group 2 arches say they are 1.75" wide.

 

If you want the standard 10" x 4.75 rims you'd need approx 1.75" to 2" of spacer to get them flush (as they fit under the standard arches normally with the included rose petal spacer)

 

If you went to the 12" x 6 rims they stick out an extra 2" over the 10" version which might get you close to flush