83 replies to this topic

[JDImini]

This is part of the reason for making the cyclecar, with the Festival of Speed (FoS) coming up this weekend.

 

I'd like to attend another FoS but this is the Festival of Slowth

 

 

[Designer]

Thank you for posting the video.

What amazing wonderful machines and I now fully appreciate your commitment to making one yourself.

I look forward to seeing a video of your great creation putt putting along a UK road.        

[Jarvis_SPI]

Reverse gear at 9mins is great!

[JDImini]

Reverse gear at 9mins is great!

proper Flintstones 

[JDImini]

Only did a bit more cutting of the armour plating today at least 50 bits to cut and drill, the neighbours must wonder what I'm doing

 

 saw.jpg   244.46K   0 downloads

[JDImini]

This is the vehicle that inspired the project

 

https://youtu.be/pQWCzPd8FXw

 

It was restored by Tim Gunn, the guy that does the bicycle restorations on The Repair Shop

 

 

 

[Designer]

Well that's it The Moop is going back onto the axel stands Rack and Pinion coming off and a large Cotton Real and Wire Rope going in. Brilliant      

[JDImini]

It's not how I woke up (this is how I got the wheels from FB)

 

 IMG_9626.jpg   169.14K   1 downloads

 

 IMG_9627.jpg   173.84K   0 downloads

 

but it's how I look now (and a bucket of soapy water later)

 

 IMG_9641.jpg   200.81K   0 downloads

 

 IMG_9642.jpg   242.31K   0 downloads

 

bad use of of a song lyric (Rinse & repeat by Riton)

 

The photo doesn't show the true colour green it looks "army green" so I wonder what the history is of them

 

Got these scrapper bikes from a local bike charity, they were on the scrap pile so I made a donation and gave them some mountain bike wheels I bought for the cyclecar, but juts wouldn't look right. The plan is to cut the bottom brackets off bend the cranks mount them vertically on the front axle as steering joint

 

 IMG_9636.jpg   233.55K   0 downloads

 

 IMG_9637.jpg   194.98K   0 downloads

 

or another plan is to make some cast iron steering joints, so making patterns at the moment and I'll gets some photos tomorrow

[JDImini]

A bit of gratuitous angle grinding for one set of steering axles

 

 IMG_9643.jpg   222.99K   0 downloads

 

 IMG_9645.jpg   166.39K   0 downloads

 

I like the BSA sprocket, I'll repurpose it somehow.

 

and some woodwork making a pattern for another style of steering axle to be cast in iron

 

 IMG_9646.jpg   147.62K   0 downloads

 

 IMG_9647.jpg   147.88K   0 downloads

 

 IMG_9649.jpg   118.84K   0 downloads

 

still needs a lot of work, but getting there.

Edited by JDImini, 06 August 2023 - 08:17 PM.

[johnR]

Loving it!

[JDImini]

Loving it!

Thanks JohnR

[Retro_10s]

This is very very cool!!! looking forward to the progress!

[JDImini]

This is very very cool!!! looking forward to the progress!

Thank you Retro_10s

[JDImini]

I found an old fire extinguisher on FB marketplace only £20 which I thought was a bargain. I love the look of the rivets so thought it would be a good candidate for a fuel tank. Just need to work out how to dismantle it and hope there's nothing nasty inside and then put a filler cap on it

 

 Fire extinguisher fuel tank 2.jpg   188.32K   0 downloads

 

 Fire extinguisher fuel tank 1.jpg   176.91K   0 downloads

Edited by JDImini, 13 August 2023 - 05:48 PM.

[JDImini]

also spent a bit more time working of the pattern for sand casting the king pins and axle end

 

I've no idea if they'll be strong enough in cast iron, but I'll be going so slow that if anything does fail it'll be in slow motion

 

 steering hub together.jpg   127.13K   0 downloads

 

 

Edited by JDImini, 13 August 2023 - 05:53 PM.