9 replies to this topic

[My73Inno]

Sooo long story short, I've been thinking about getting my hands on a Mini project for a while now and I was particularly interested in one of the "odd ones" (Elf, Hornet or Innocenti basically) but prices have been skyrocketting lately so was beginning to loose hope...

 

But then last December I was given a chance to buy an extremely cheap Innocenti Cooper 1300 that had been sitting for a couple of decades, a true Christmas miracle! Well maybe not...

 

The car is essentially a rather rough Innocenti shell (most of it), with the usual rust (so a lot), most of the Inno bits missing, some terrible butchering/older repairs and obvious front and rear collision damage.

Needless to say, it was love at first sight...

 

 IMG_20211224_111744.jpg   59.31K   1 downloads

 IMG_20211224_111755.jpg   64.54K   1 downloads

Yup, there's an Inno under there.

 

Quick cleanup, time to evaluate...

 IMG_20211228_114100.jpg   66.37K   0 downloads

Got a spare Mk1 bonnet with the car, that'll require some modification but hey that's something!

Original Innocenti doors are present but quite rusty...

 

 IMG_20211228_114138.jpg   63K   0 downloads

Good from far but far from good... Lower section has been slightly pushed in and has completely rusted through anyway...

 

The floors and sills had already been replaced/repaired at some stage but were completely gone...

 

 IMG_20211230_131800.jpg   57.6K   0 downloads

Yikes

 

(For some reason, the front part of the gearbox tunnel appears to have been repaired as well, using the wrong (older) style, which was then butchered to accept the gearbox extension mounts... A happy mess.)

 

Anyway, got to work straight away, starting with two full length floorpans, LH doorstep, LH rear wing, LH inner font wing, front part of the tunnel, crossmember, sills and jacking points.

 

 IMG_20220106_151839.jpg   67.49K   1 downloads

Very ripe indeed

 

 IMG_20220113_160922.jpg   32.84K   1 downloads

Wing and doorstep were too far gone

 

 IMG_20220114_165932.jpg   42.38K   1 downloads

 IMG_20220117_112328.jpg   41.09K   1 downloads

Looking a lot nicer already!

 

 IMG_20220127_155414.jpg   35.64K   1 downloads

New pans are in! The new tunnel and crossmember both came from another donor car

 

Time to move on the back of the car now...

Edited by My73Inno, 11 February 2022 - 06:46 AM.

[johnR]

do you have any pictures?

[Viktor]

Yes, pictures please! 

[My73Inno]

Woops sorry about that, edited the post with the missing pictures

[slidehammer]

looks like an interesting project, good luck sourcing the missing parts you need.

[My73Inno]

looks like an interesting project, good luck sourcing the missing parts you need.

Thanks! So far, so good... Managed to find most of the correct Carello/Altissimo lightning, engine ancillaries and some trim (badges, interior bits,...) but this is definitely a bit of a treasure hunt

[My73Inno]

Alright, so now let's move on the rear section...

 

As I mentionned, it's not the worst but there was quite alot of rust around the bumper lip (the middle section of the hinge panel being both pushed in and rotten to the point whereit was just "floating" over the boot floor), lower valance was toast too obviously...

 

 IMG_20220202_094402.jpg   47.24K   1 downloads

 IMG_20220202_094406.jpg   53.28K   0 downloads

Sweet, sweet rust worm...

 

Got the required repair sections and some cutting later

 IMG_20220202_094111.jpg   40.97K   0 downloads

 IMG_20220202_100238.jpg   38.31K   0 downloads

 

Trial fittment of the boot floor repair panel, then welding

 IMG_20220202_115523.jpg   38.32K   2 downloads

 

Next up was the lower back panel, quick trial too

 IMG_20220202_173436.jpg   34.79K   2 downloads

 

Then it was a matter of making sure it all lined up correctly with the bootlid fitted

 IMG_20220207_100221.jpg   38.6K   4 downloads

 

And finally everything welded in place including the new valance

 IMG_20220207_161318.jpg   35.39K   3 downloads

 IMG_20220207_170805.jpg   31.38K   3 downloads

[Spherix]

 

looks like an interesting project, good luck sourcing the missing parts you need.

Thanks! So far, so good... Managed to find most of the correct Carello/Altissimo lightning, engine ancillaries and some trim (badges, interior bits,...) but this is definitely a bit of a treasure hunt

 

 

You can find quite some spares on the following:

www.subito.it

www.kijiji.it 

https://coopermania.forumfree.it/

and facebook marketplace set to places like Milan/Rome with a large radius

[MichiMini]

Looks great! Did you manage to capture some closeup photos of the finished welds around the back lip where the replacement boot floor pan meets the main body shell/beneath boot lid? I'm working on this very project currently.

 

Cheers,

Scott

[riktanius]

Any update here?