173 replies to this topic

[Martin108]

 16EF9C09-9C7D-4A31-895C-0FFFA98991D2.jpeg   39.18K   1 downloads

 

White and red LED. 

[Martin108]

 87764159-8FEE-4B1D-8F4F-37B13424F696.jpeg   71.61K   0 downloads

 

Original sling seats. I couldn’t find head rests so I had some made up locally. The rear seats in this picture are from a mini bus that I tried to adapt. It didn’t work out the way I wanted so I ditched them. 

Edited by Martin108, 07 November 2020 - 01:33 PM.

[Martin108]

 D921C0EC-C4E2-483A-A1A0-4FCED7A90902.jpeg   40.61K   0 downloads  3C3D0139-FCD4-46B4-BEA8-DECF6338F962.jpeg   48.33K   0 downloads

 

Before and after.  

[KTS]

..certainly an improvement !

Out of curiosity, what are the two brackets either side of the exhaust tunnel for ?

[Maccmike8]

Beautiful work.

[Martin108]

The brackets are for the gear selector box. 

[Martin108]

 A1E2858F-8A09-43A1-91EE-9EC8ACCB53F9.jpeg   52.4K   0 downloads

Starting to fit bits.

[Martin108]

 D3EBA753-136B-45EF-85ED-745D616A7D6F.jpeg   32.45K   0 downloads  41884A8F-8830-4012-8B97-4F733BC7B8B2.jpeg   34.14K   0 downloads

 

Drilling more holes for the rear mud flaps.

[Martin108]

 61826DBC-DA48-41AC-8F3C-35254A8790DB.jpeg   30.84K   0 downloads  E95845AA-E059-4913-93C0-8FA215E72A23.jpeg   29.41K   0 downloads

 

Drilling holes to fit the covers. I used rivnuts to fix these panels.

[Martin108]

 A360DAAE-D93A-4AB1-BBB6-824AF7F3D06D.jpeg   97.98K   0 downloads  E74A3BDD-8540-4D00-9714-1D13A1838AB2.jpeg   69.18K   0 downloads

 

Fitting the rear subframe. 

[Martin108]

 DA3FCCA4-4CB7-47A2-9429-FB923F722522.jpeg   68.96K   0 downloads

 

Rear bumper sorted. 

[Martin108]

 32028313-1CBD-42C1-BE34-061B1363E2BB.jpeg   59.98K   0 downloads

 

Ebay is a wonderful place. I searched high and low for an expansion tank.

[Martin108]

 C72B7F32-A07F-46BA-824E-A038D4CE98F1.jpeg   31.44K   1 downloads  75D0A25F-3828-430B-B4D4-021BF5E7E5FD.jpeg   35.26K   1 downloads  C0B98D6E-40FC-47EC-874D-4D1D0CBC96C9.jpeg   39.16K   1 downloads

 

Something to hold on to. I’m going to get these handles chromed. 

Edited by Martin108, 07 November 2020 - 01:40 PM.

[Spider]

Loving your thread here Martin, wonderful work, not rushed and loads of attention to detail.

 

I also like your choice in tyres, they very much look the part.

 

Just one item here caught my eye

 

 

 

Drilling holes to fit the covers. I used rivnuts to fix these panels.

 

On these covers, originally didn't have any screws that would end up under the parcel tray, as there's so little room between these parts, if you have to remove that cover, you'll also need to take the Tray out too, though, perhaps using say a hex headed screw might work ?

[Martin108]

Loving your thread here Martin, wonderful work, not rushed and loads of attention to detail.

 

I also like your choice in tyres, they very much look the part.

 

Just one item here caught my eye

 

 

 

Drilling holes to fit the covers. I used rivnuts to fix these panels.

 

On these covers, originally didn't have any screws that would end up under the parcel tray, as there's so little room between these parts, if you have to remove that cover, you'll also need to take the Tray out too, though, perhaps using say a hex headed screw might work ?

I didn’t think about the parcel shelves when I put that together. I’ll have to have a look when I get the parcel shelves sorted. 

Edited by Martin108, 07 November 2020 - 11:24 PM.