61 replies to this topic

[Harry L]

Went to test the wipers and it turns out the original motor had seized so new one fitted along with a new gear etc.

 

 19.jpeg   53.95K   0 downloads

 

 

MPI throttle pedal purchased and shortened to improve the throttle response, previously it was full throttle at about 1cm movement 

 

 20.jpeg   58.46K   0 downloads

 

 

Return spring fitted

 

 22.jpeg   51.59K   0 downloads

[Harry L]

I also bought some Civic Type-R pedal covers for the brake and clutch, just need to work out a way of fitting them securely. 

 

 24.jpeg   55.22K   0 downloads

 

 

Fitted a numberplate light

 

 18.jpeg   67.43K   0 downloads

 

 

Then it was off to Slark for a wheel alignment

 28.jpeg   54.49K   0 downloads

 

 27.jpeg   61.77K   0 downloads

 

 

It then became apparent that my rear subframe is all bent so the rear wheels have about 3mm toe out and can't bring them in! Replacement subframe has now been sorted and that's where I'm up to, I'm going to fit the replacement and take it back for a corner weighting. 

 

That brings us up to date with where we are at with the car now, next steps once the subframe is replaced are to finish off the wiring, get the dash fitted, get the audio equipment fitted in the rear and then enjoy it!