16 replies to this topic

[LittleRedRocket]

Hello All,

I am 15 years old and have a 1979 Mini 1000 with a MG Metro 1275 engine. I have an alloy rocker cover that I would like to fit to my Mini. I have bead-blasted the rocker cover and have plans to paint it (See attached photos). I am unaware of the history of this rocker cover, but I need a oil filler cap before I fit it. I have looked on Mini Sport as well as, Mini Spares and Mini Mania, and I am not sure which cap, if any will fit. Does anyone know any history about this rocker cover and what oil filler cap will fit?

 

After bead blasting

 IMG_6003.JPG   38.34K   7 downloads

 

 

Before bead blasting

 IMG_4546_Fotor.jpg   61.43K   8 downloads

 

[nicklouse]

Any will fit.

It it may have come with something special.

[LittleRedRocket]

Any will fit.

It it may have come with something special.

Notice how the lip is on the outside? A fuel cap almost fits. But most rocker covers have the lip/thread on the inside. 

Edited by LittleRedRocket, 28 April 2020 - 11:32 PM.

[Bens mini 66]

Do you have a cap you could try to fit onto it?

[LittleRedRocket]

Do you have a cap you could try to fit onto it?

Like I said, a fuel cap is close, but rocker covers almost always have the thread/lip on the inside so I don't have any that are remotely close.

Edited by LittleRedRocket, 29 April 2020 - 12:44 AM.

[LittleRedRocket]

Anyone have any ideas?

[Spider]

It looks to me like it would take something in a similar style to a Radiator Cap, only bigger and suited to the job.

[GraemeC]

That’s a nice HRG rocker cover, originally made for in-line A series engines (if it still had its original badge it would be backwards when fitted onto a Mini).

They originally had a cap made by a company called Ceandess. I think the caps are still available, but I’d need to ask some questions of a knowledgeable friend as to who makes/supplies them now.

 

Pm'd

Edited by GraemeC, 29 April 2020 - 08:32 AM.

[KTS]

some background on HRG rocker covers below

 

http://mk1-performan....co.uk/hrg.html

[gazza82]

The breather pipe doesn't look original either .. looks more like 1/2" plumbing copper!

[LittleRedRocket]

Does anyone know if this cap will fit?

https://ceandess.onl...ck-019740010cab (of course without the dipstick)

 

Does anyone else have any other suggestions for a cap that will fit?

 

(and yes the breather is just 1/2" copper, it wasn't me though)

 

Thankyou everyone for your help!

Edited by LittleRedRocket, 29 April 2020 - 06:08 PM.

[KTS]

That one looks to be 5.5" so probably a bit big.

What's the diameter of the neck on the rocker cover?

[LittleRedRocket]

 IMG_6121_Fotor.jpg   33.87K   1 downloads

 IMG_6122_Fotor.jpg   47.69K   1 downloads

Yep, way too big

 

Maybe this?

https://ceandess.onl...ick-05758000zkb

or this?

https://ceandess.onl...ted-0334200azfb

 

or other?

https://ceandess.online

 

[GraemeC]

Most likely:

https://ceandess.onl...r-without-chain

but contact them with your pictures, they will advise exactly what to measure.

[brivinci]

This might day a day late and dollar short but I have a different period finned cover (like the standard alloy ones fitted to Metros) that uses a ceandess 02139000ZKB cap...at least that us what Katie over there told me. Same cap used on Triumph motorcycles. My rocker is vented as well and came with a non-vented cap. Not sure it matters unless you block off your vent on the cover...then you will need one in the cap.