Jump to content


Photo
- - - - -

Magnum Door Skin


  • Please log in to reply
12 replies to this topic

#1 Avtovaz

Avtovaz

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,236 posts
  • Location: Babylon and Ting

Posted 04 April 2020 - 07:28 PM

just bought a magnum door skin of a well known company on ebay, its not in its usual black coating, which does that mean its a chinese one?

 

the top part strengthener is welded on but while i think the skin was bent. So its holding a bow. Is that usual now? I mean, is all magnum stuff chinese are as bad as the 2 sets of wings i tried to fit to my car?

 

thanks



#2 cal844

cal844

    Crazy About Mini's

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 9,622 posts
  • Location: Ballingry, Fife
  • Local Club: TFMOC

Posted 04 April 2020 - 07:44 PM

Believe it or not Magnum panels are UK made. The presses are worn and yes the top of the skin does bow, it is repairable though but a bit of a faff

#3 Avtovaz

Avtovaz

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,236 posts
  • Location: Babylon and Ting

Posted 04 April 2020 - 07:46 PM

right ok, i think if i laid it flat id have 1/2" difference in the middle or more...

 

i thought the wings defo where chinese? the presses must be well worn out by now, they whre MILES off!



#4 sonikk4

sonikk4

    Twisted Paint Polisher!!!

  • Admin
  • PipPipPipPipPipPipPipPipPipPipPip
  • 16,033 posts
  • Name: Neil
  • Location: Oxfordshire

Posted 04 April 2020 - 08:20 PM

The bow at the top can be dealt with by gently pressing down on the centre of it before fitting it to the door carcass. Done this a couple of times now.



#5 Avtovaz

Avtovaz

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,236 posts
  • Location: Babylon and Ting

Posted 04 April 2020 - 08:27 PM

ok ill have another look tomorrow, but i did look last thing today when packing up you see.. thanks



#6 mercenary62

mercenary62

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 359 posts
  • Location: some where in the 70s
  • Local Club: mini clan

Posted 04 April 2020 - 08:30 PM

buy cheap buy twice sorry but that's how it is



#7 cal844

cal844

    Crazy About Mini's

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 9,622 posts
  • Location: Ballingry, Fife
  • Local Club: TFMOC

Posted 04 April 2020 - 10:13 PM

right ok, i think if i laid it flat id have 1/2" difference in the middle or more...

i thought the wings defo where chinese? the presses must be well worn out by now, they whre MILES off!



They had piles of wings beside the production lines, if a wing didnt fit within half an inch it got chucked on the pile and swapped for another lol.

As mentioned above you can fix the bow easily

#8 Avtovaz

Avtovaz

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,236 posts
  • Location: Babylon and Ting

Posted 04 April 2020 - 10:21 PM

oh check out the build thead of mine, the magnum wings ouch! at the front there where welded up totally wrong, ther eis no uncrashed mini they would fit lol!



#9 hulsmeier

hulsmeier

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 158 posts
  • Location: sunderland

Posted 20 July 2020 - 08:25 PM

Noticed on their Facebook page they are using automotive grade zintec steel. I've got a few panels without the black paint and wonder if this is the reason

#10 Avtovaz

Avtovaz

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,236 posts
  • Location: Babylon and Ting

Posted 20 July 2020 - 08:46 PM

maybe zintec is much cheaper that it was now.

 

they did fit a lot better than i thought they would do in the end.



#11 cal844

cal844

    Crazy About Mini's

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 9,622 posts
  • Location: Ballingry, Fife
  • Local Club: TFMOC

Posted 20 July 2020 - 08:49 PM

I've used magnum wings previously, some fitted better than Heritage, others were worse than heritage

#12 Avtovaz

Avtovaz

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,236 posts
  • Location: Babylon and Ting

Posted 20 July 2020 - 08:54 PM

For the advantage, i think the two sets  i have owned, they had more chance of fitting a clubman that a bellnose.



#13 gaspen

gaspen

    One Carb Or Two?

  • TMF+ Member
  • PipPipPipPipPipPipPip
  • 942 posts
  • Location: Budapest

Posted 11 November 2024 - 07:58 PM

Hi 

 

What is the quality of the new Magnum door skins ? Is there any improvement since 2020 ?






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users