11 replies to this topic

[nicky awd]

hi you all
i'm nick from belgium and started a new project for track use
i'm building a classic mini vtec b16a1 turbo awd with 4x4 pieces from a honda crv and a rear axle from a mazda mx5 miata with radiator in the back
i hope the engine makes around 300-400hp in the future
i made everything myself,
on the pictures you can see how far i am at the moment
sorry for my bad englisch

Attached Files

•  8534DD3F-3A62-4471-8C3A-1F8F870CDCD3.jpeg   63.87K   17 downloads
•  D432267E-9D45-4F63-8B77-41D91A801BBD.jpeg   35.34K   7 downloads
•  C236297E-9122-466B-A607-A50CA372D17D.jpeg   53.6K   2 downloads
•  A88B447A-8911-4450-AE36-318489B892D6.jpeg   54.44K   8 downloads
•  C95B1F41-5407-4CDD-887D-DB8A04761ECF.jpeg   46.89K   6 downloads
•  F7A22C0A-279E-496E-8078-D2770B8FAFFA.jpeg   37.35K   5 downloads

[riktanius]

Seems like a crazy beast. Please keep the posts coming!

[Steve220]

Cool! I didn't realise the Honda transfer drive gear was the same ratio as the FD on the MX5! That's convenient!

Edited by Steve220, 25 September 2019 - 12:38 PM.

[nicky awd]

No using mx5 diff. I already build the crv diff in the mazda subframe?

[nicky awd]

No using mx5 diff. I already build the crv diff in the mazda subframe?

[nicky awd]

Also made the mazda subframe 20 cm smaler for correct wheelbase.
Now busy making boostpipes

[nicky awd]

boostpipes finaly done

Attached Files

•  mini20.JPG   111.34K   4 downloads
•  mini19.JPG   79.93K   1 downloads
•  mini21.JPG   65.95K   1 downloads
•  mini17.jpg   95.3K   2 downloads
•  mini22.JPG   123.38K   5 downloads
•  mini23.JPG   105.07K   3 downloads
•  mini24.JPG   107.42K   2 downloads

[nicky awd]

water connection adapted for the radiator in the back

Attached Files

•  mini18.JPG   99.07K   3 downloads
•  mini25.jpg   97.27K   3 downloads

[nicky awd]

Bracket for ignition coil

Attached Files

•  DB83E542-A7EA-41DC-87CB-7B881E76E303.jpeg   40.65K   4 downloads
•  CD94F254-D673-48E8-A324-BFEC0C6FD144.jpeg   38.94K   6 downloads
•  28B0D1DB-8E20-42E6-A900-60D1ED2CAD5E.jpeg   62.44K   6 downloads

[hotroder69]

Nice work, thanks for sharing

[Wreckitralph1]

nice work mate ime along similaire lines trying to find the correct gearbox is turning out to be a pain [ vauxhall f28]

[Forestway]

Hi Nick,

That’s great work, I’m particularly interested in the chop down of the MX5/ Miaita rear subframe.

I am doing a RWD Electric conversion on a mini moke, and using an MX5 rear would be loads cheaper than a new custom sub frame from minitec whoever.

Do you think it would fit under the floor in a std mimi or would it make the car loads higher? I’m not bothered about larger wheels, I think they will look cool on a moke