Jump to content


Photo
- - - - -

1977 Leyland Mini - 1275

clubman

  • Please log in to reply
11 replies to this topic

#1 parrellan

parrellan

    Just On Tickover

  • Noobies
  • Pip
  • 8 posts
  • Location: Sydney

Posted 27 October 2017 - 11:40 PM

Hi Everyone

 

I have been browsing this forum for a number of years whilst very slowly carrying out my own re-build project and have finally decided to document the build and share my experiences to date. 

 

Me and my dad purchased the mini in May 2012 because it was cheap and we always talked about restoring an old mini. Although i really like the roundnose mini's we decided to get a clubman as they were cheaper (although i now realise the cost difference from that initial purchase is insignificant to the overall project cost) and also because there is sentimental value and nostalgia with the clubman as its the first car my dad bought my mum before they were married. 

 

 

Attached are the photos of the car when we picked it up and got it home. It was located in a chicken coop on a farm and had been neglected for quite some time. The previous owner had purchased it so that him and his son could restore it but they gave up after only stripping bits of the interior and removing the engine (original 998cc engine still remains on the pallet that was used to pick it up over 5 years ago)

 

i will continue putting sorting through the photos and posting them progressively untill i get to my current stage. 

 

Attached Files



#2 blueovalcraig

blueovalcraig

    Mini Mad

  • Members
  • PipPipPipPip
  • 193 posts
  • Location: Rothesay, Isle of Bute

Posted 28 October 2017 - 10:15 AM

Good luck with the project.  Will be lovely when it's finished



#3 Vinay-RS

Vinay-RS

    Put's foolish ideas in peoples heads

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 2,093 posts
  • Location: Cape Town

Posted 28 October 2017 - 08:10 PM

Was your Clubman an Aussie GT? Looks like it has the wider lips for the GT arches and the Rostyles.  Good luck with getting the project back on track :) 



#4 parrellan

parrellan

    Just On Tickover

  • Noobies
  • Pip
  • 8 posts
  • Location: Sydney

Posted 28 October 2017 - 11:00 PM

Thanks for the support



 

Was your Clubman an Aussie GT? Looks like it has the wider lips for the GT arches and the Rostyles.  Good luck with getting the project back on track :) 

 

unfortunately its not a GT, it was a Clubman LS with a 998cc however I will be putting a 1275A+ engine in it as part of the build.



#5 parrellan

parrellan

    Just On Tickover

  • Noobies
  • Pip
  • 8 posts
  • Location: Sydney

Posted 28 October 2017 - 11:19 PM

Here are some photos of stripping down the car, this process was made a little easier as the previous owner had already removed the engine and quite a few of the interior parts however very tittle care appeared to be taken when doing so as nothing was labelled and all bolts and hardware was thrown into a communal bucket.

 

Needless to say, this was a lot of fun and I think the only time I had my whole family helping me throughout the build as they were all excited also.

Attached Files



#6 parrellan

parrellan

    Just On Tickover

  • Noobies
  • Pip
  • 8 posts
  • Location: Sydney

Posted 29 October 2017 - 11:15 AM

Another bunch of photos

 

Mini Stripped and off to be sand blasted.

 

Attached File  IMG_0304.jpg   63.8K   0 downloads

Attached File  IMG_0308.jpg   75.32K   0 downloads

Attached File  IMG_0313.jpg   70.66K   0 downloads

Attached File  IMG_0314.jpg   73.65K   0 downloads

 

and back from sand blasting......

Attached File  IMG_0334.jpg   63.42K   0 downloads

Attached File  IMG_0335.jpg   65.29K   1 downloads



#7 johnR

johnR

    Up Into Fourth

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 2,287 posts
  • Location: Dorset

Posted 29 October 2017 - 12:52 PM

looks fairly solid?

#8 parrellan

parrellan

    Just On Tickover

  • Noobies
  • Pip
  • 8 posts
  • Location: Sydney

Posted 29 October 2017 - 11:08 PM

Yeah compared to some of the other resto projects i have seen on here it wasn't too bad but still had its fair share of rust that needed to be fixed. I managed to borrow a welder for what was meant to be a few months ended up being a few years from one of my dads friends who owned a panel beater shop.

 

Taught myself to MIG weld from watching youtube video's and a lot of practice prior to digging into the mini.

 

Below are some of the detailed photos when it came back from the sand blaster. 

 

Attached Files



#9 parrellan

parrellan

    Just On Tickover

  • Noobies
  • Pip
  • 8 posts
  • Location: Sydney

Posted 02 November 2017 - 08:58 AM

Some of the photos of the rust repair.

 

 

Attached Files



#10 parrellan

parrellan

    Just On Tickover

  • Noobies
  • Pip
  • 8 posts
  • Location: Sydney

Posted 02 November 2017 - 10:39 AM

Attached File  IMG_2386.jpg   63.79K   1 downloads

 

Attached File  IMG_2387-1.jpg   91.13K   1 downloads

Attached File  IMG_2408.jpg   53.63K   0 downloads

 

Attached File  IMG_0608.jpg   44.27K   0 downloads

 

Attached File  IMG_0609.jpg   40.64K   0 downloads

Attached File  IMG_0659.jpg   50.25K   1 downloads

Attached File  IMG_0715.jpg   30.36K   0 downloads

Attached File  IMG_0712.jpg   46.3K   0 downloads

 



#11 parrellan

parrellan

    Just On Tickover

  • Noobies
  • Pip
  • 8 posts
  • Location: Sydney

Posted 27 February 2018 - 11:22 AM

Long time no post

 

attached are some of the photos of the subframe and suspension progression. 

 

More photos to follow. 

Attached Files



#12 Jase

Jase

    One Carb Or Two?

  • Traders
  • PipPipPipPipPipPipPip
  • 1,164 posts
  • Location: Wales

Posted 23 February 2022 - 02:31 PM

How are you progressing with this?







Also tagged with one or more of these keywords: clubman

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users