Hi, I stripped my subby of pretty much everything to see if it's worth saving. What do you guys think?
Edited by dasupersprint, 06 September 2016 - 01:09 PM.
Best Answer tiger99 , 06 September 2016 - 03:31 PM
Scrap it. In theory you could weld all the corroded areas but there still would be rust lurking in the seams which you would not be able to eradicate.
You should also put a value on your time, which is invariably precious and in short supply. At even £10 per hour you could buy a genuine subframe for less than the cost of repairing the old one.
Go to the full post
Posted 06 September 2016 - 01:38 PM
Posted 06 September 2016 - 02:32 PM
Depends how good of a welde ryou are imo.
Posted 06 September 2016 - 03:31 PM Best Answer
Posted 06 September 2016 - 03:56 PM
How easy are they to get outside UK and Europe? .. banner suggests OP is in Canada!
Posted 06 September 2016 - 04:39 PM
How easy are they to get outside UK and Europe? .. banner suggests OP is in Canada!
Yes I'm in Canada. Parts are easy to find. Small parts I order from the UK, but for big parts like this we have basically one supplier, witch is Moss Motors. A Subframe is 534$ US
Posted 06 September 2016 - 04:42 PM
Scrap it. In theory you could weld all the corroded areas but there still would be rust lurking in the seams which you would not be able to eradicate.
You should also put a value on your time, which is invariably precious and in short supply. At even £10 per hour you could buy a genuine subframe for less than the cost of repairing the old one.
That's what I think, this project is taking me so long because I want to do everything by myself. I think I'm gonna start paying
Posted 11 September 2016 - 07:00 PM
Bin It.
Not worth the bother.
Posted 11 September 2016 - 07:21 PM
Posted 12 September 2016 - 11:58 AM
Posted 12 September 2016 - 02:35 PM
Thanks guys, a new subby is on the way!
Mini Technical Sections →
Problems, Questions and Technical →
Uneven Ride Height - Entire Right Side LowStarted by YankWithAMini , 07 Sep 2024 suspension |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Can't Break Knuckle Joint Away From The Hydro BagStarted by Andy3659 , 08 Jul 2024 suspension |
|
|
||
Answered
suspension
Mini Technical Sections →
Problems, Questions and Technical →
Fitting A Rear Subframe - HelpStarted by Tweetypie , 06 Jun 2024 suspension |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Hydrolastic Suspension IssueStarted by Rod wallace , 18 May 2024 suspension |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Mot Advisories On Potential PurchaseStarted by billlifferr , 12 Jun 2023 suspension |
|
|
0 members, 1 guests, 0 anonymous users