7 replies to this topic

[Sutty01]

Ok my dad came to me just and told me hes having our engine completely overhalled and then he started on somethink about a titanium crank but he lies alot

Do you think its worth me saveing for a kent 276 cam to shove in while the engine is out ?

[Turbo Phil]

A decent cam will give a good power increase, but will give best results when coupled with other mods. What head, exhaust , inlet etc you got ?

Phil.

[Sutty01]

its coupled with my staghe one kit

K&n air filter
new carb needle
maniflow inlet
3 to 1 branch manifild straight through 2 boxes out a rc40
its had all new cooling and soon to be red samco hoses
its had a brand new standard head and new gaskets ect all over

[Sutty01]

there may be outher mods being done aswel as the 276 cam but it is unsurew till me and my dad discus the matter

[Turbo Phil]

Others may disagree, but i'd try a 266 or SW5. But if your going to work the head a little then maybe try a 276.

Phil.

[Sutty01]

hopefully if i can get the head done ill go for the 276 but how much wil it cost to het the head done as its a new one already ?

[Dan]

Would definitely say you need some head work to get the best from any cam. Even the stock unit can supply extra ponies if it's allowed to breath better.
SW5 is very very good. Consider MED Hi-Torque maybe, it pulls well from very low down.

[miniman5]

oww! cant wait to c how much you are going to be paying on insurance! its gnua be abotu 700 ish qwid jsut for me totaly standard god knows what u r going to be paying