6 replies to this topic

[Russell]

I have an engine I'm looking to sell. But have no idea what it's worth!

It is a mk1 997 cooper block 12A204 casting.
It has been upgraded with 998 cooper parts, 12A595/6 crank and 12G124 rods. It either has machined cooper (there is no "D") or flat top 998 pistons.
64.58mm bore and 76.2mm stroke.
It has clearly been modified for high performance, it has a well ported 12G295 cooper head with oversize valves-33 and 29mm. The block has valve pockets to suit. Both the block and head have been skimmed, tuners stamping are marked on top face.
It looks to be in excellent condition, has no detectable wear on the bores, can still see honing marks and turns freely.
No flywheel, housing or gearbox. Just the engine and head etc.
Any ideas of value much appreciated.
Tom

[Russell]

Please see pictures below

Attached Files

•  image.jpg   19.46K   24 downloads
•  image.jpg   31.53K   25 downloads
•  image.jpg   35.59K   22 downloads
•  image.jpg   32.34K   28 downloads
•  image.jpg   35.64K   25 downloads
•  image.jpg   40.85K   25 downloads
•  image.jpg   42.89K   28 downloads

[Russell]

Does anyone have even a vague idea?

[MiniJosh92]

Where in the country are you, have a customer who may be interested?

Edited by MiniJosh92, 19 January 2016 - 08:47 PM.

[Russell]

Letchworth, hertfordshire

[Russell]

Anyone?
What would std 997s and std 998 cooper engines be worth?
Thanks

[Russell]

Now on eBay
http://www.ebay.co.u...tm/331773624408