#1
Posted 14 July 2015 - 01:28 PM
#2
Posted 14 July 2015 - 02:10 PM
#3
Posted 14 July 2015 - 03:03 PM
The drive for an A series engine is different to an A+ and will not fit in an A+ motor
Depending upon the type of dizzy you have purchased, 25D or 45D you can swap the internals of an A series dizzy into an A+ dizzy therefore making an A+ version, but a better alternative is to just buy an A+ dizzy.
If you bought it new I would contact the company you bought it off, they may swap it for an A+ and if your lucky may cost nothing or only a restock fee.
#4
Posted 14 July 2015 - 04:03 PM
#5
Posted 14 July 2015 - 05:43 PM
#6
Posted 14 July 2015 - 09:45 PM
You can swap the Drive Dogs on the Dissys over.
I do recall looking at machining up an A Drive to fit in to an A+ Block and I seem to recall the A Drive is just simply too short to do the job.
#7
Posted 15 July 2015 - 06:09 PM
Il just get the right dizzy, i spoke to minisport and they said your best getting the right dizzy, cheers for the replies lads!
Also tagged with one or more of these keywords: brakes
Mini Technical Sections →
Problems, Questions and Technical →
Is It Easy To Swap Post 84 Drums To Pre 84 Drums?Started by Daniel Watkin , 03 Aug 2024 brakes |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Dunlop D1 Fitment And InstallationStarted by Mrhydro , 18 Jul 2024 brakes |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Brake Cylinder Reservoir Cap.Started by OJDee , 15 Jul 2024 brakes, electrical |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Brake Pedal Relocation?Started by tommyboymini , 08 Jul 2024 brakes |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Cutaway Section View Of 7.5" Cooper S Caliper?Started by sandman , 01 May 2024 brakes |
|
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users