This topic is locked
Thought I would put this little lot on my favourite forum before I get my mate to put them on club Lupo/Polo
For sale I have 4x100 - 5x130 Porsche fitment PCD adaptors. They are VW centre bore as were originally bought when I had a Lupo, but I have 1mm spigot rings which convert them to fit BMW MINIs bore which I had them on too. They are 20mm so a good size for Porsche offset wheels. They have the suitable hex bolts to fit them to your hub.
Plus; 20x suitable bolts long enough.
These were on Bini for about 1000 miles and never had a single issue.
4x Porsche hubcentric spacers (no universal crap) which consist of two 5mm and two 7mm. On the Bini, with these on, 7 slot wheels just about tucked without rubbing with the car pretty low. These on their own cost me £130 and still in great condition.
Also have a set of 4 Porsche 7 slot alloys. 16x7. These looked sweet on my Bini and very different which I like. They have great tyres on them with a very slight stretch. 195/45. The 7 slots are currently plasti dipped silver. One of the rims has some kerb rash, but the others are good and still look half decent. Probably could do with plasti dipping again to tidy them up.
I also have a set of 4 Porsche D90 alloys. 16x7 and 16x8. No tyres and require refurb, but only as in rubbing down and spraying as they have no scuffs on at all.
I am only selling as I am collecting some 3SDM wheels for the Bini during the week and not going to be running Porsche wheels again as the only other wheels I was considering were Porsche twists, but don't fancy them anymore and won't be going back to the other Porsche wheels.
I am giving them all a good clean tomorrow so will take photos for anyone interested.
Prices:
Adaptors with all bolts ready to go - £120
Spacers - £80
7 slots - £230
D90s - £180
Deals can be done for a set of wheels and the adaptors, plus spacers if needed.
Collection only please. Northants
Thanks, Jamie
Edited by megamini_jb, 21 March 2015 - 07:15 PM.
