910 replies to this topic

[GraemeC]

Where's the bottom of the knuckle joint seat gone on those top arms??!!

[nicklouse]

Where's the bottom of the knuckle joint seat gone on those top arms??!!

What is one of them?

It has never had any. And I was fed up picking gravel out of the casting.

[nicklouse]

Old A panels off.

Might see if I can find some Mk2 rear lights.

[nicklouse]

Was hoping to get the floor ready today but spent the time remaking the exhaust for the van. That was a fight.

So I thought I would post up some pictures of the remote repositioned oil filter. The idea being to filter the oil before the pump to hopefully kerp the pump in good condition if there were any gearbox issues.
This was done in the early 90s and the engine has been in 3 Hillclimb cars.

[Tupers]

What does the pipe work look like on the front of the block? Both blanked off or linked together without the filter?

[nicklouse]

Basically it looks standard. Standard metal pipe across the block but into a housing that does not have a filter attachment.

Sorry no pics yet.

[nicklouse]

Ok more pics.

[nicklouse]

Today has been cleaning the floor.

[nicklouse]

Top arms rebuilt and assembled.

Rear bump stop position decided on.



And floor treated.

[nicklouse]

Last bit of welding done. Well except for the A panels but they don't count.



Sub frame has gone for blasting and epoxy.

[nicklouse]

Rear suspension striped.



Now to find a person with a lathe and a 10Ton press.

[Gr4h4m]

Looking like you are putting the hours in

[nicklouse]

Found a man with a press.



And he knows a man with a lathe.

Now do I change the shocks to 10mm or not?

[nicklouse]

It is now the right way up.



Who else uses Hockey Pucks?

[nicklouse]

Found some grommets