910 replies to this topic

[nicklouse]

dont really want to tow out of the grill now. so popped into MerlinMotorsport and got these.

 

[nicklouse]

while there I had a look around the paddock as there was an event on this weekend

[MIGLIACARS]

didnt the spaceframe mini brakes melt

Edited by MIGLIACARS, 08 July 2019 - 07:12 PM.

[nicklouse]

while back in the UK i collected a few parts.
 
not actually sure that this will fit due to the oil system.
 

 
a full length pipe to the back of the car so i can add a cat where i can
 

 
and then some parts to make the rear box from some where a bit more local.
 

 
unfortunately they dont seem to have quite flared the input part correctly but as they are not welded in i should be able to fix that.

Well the manifold has gone back to Maniflow. And I will be collecting something new from them at the IMM.

[riktanius]

Is that a custom rad? what are the dimensions?

[nicklouse]

Is that a custom rad? what are the dimensions?

Fiat Panda.

[nicklouse]

More shiny stuff

[nicklouse]

well back from the IMM and 5 weeks away from the car, meet some great people and came away with some ideas and bits.

so to continue with the above they will go with this.

to give

 

the Maniflow 3 into collector has been upgraded to this

and this will be added

picked up another rocker cover

and some bling.

 

and a few new tools and stickers.

 

[nicklouse]

oh and there were a few new tools

[Steve220]

After showing my the head take off, nick, I'm really leaning towards the idea of feeding my top rad hose directly!

[Curley]

After showing my the head take off, nick, I'm really leaning towards the idea of feeding my top rad hose directly!

 

Don't do it. Been there done that, does not work. Unfortunately the pressure coming from the rad side is too great and it ends up back feeding into the heater takeoff side.

 

Edited by Curley, 14 August 2019 - 05:36 PM.

[nicklouse]

After showing my the head take off, nick, I'm really leaning towards the idea of feeding my top rad hose directly!

 
Don't do it. Been there done that, does not work. Unfortunately the pressure coming from the rad side is too great and it ends up back feeding into the heater takeoff side.
 

There is one big flaw in your statement.

In my view if it is fed into the top or bottom hose does not really mater but the advised way is to the top hose.

[nicklouse]

copper washer added and fitted

[nicklouse]

decided that the Yellow FIA tow rings would be a pain to fit before the next outing so back to the old version. just need to make it a tad wider.

[Curley]

There is one big flaw in your statement.

 

?

 

In my experience top or bottom hose does matter. However I'm talking about a relatively 'standard' side mount set up. I have no doubt you will have different experience with your front mount set up - there's not much stock on that.