910 replies to this topic

[nicklouse]

 10629572_10152632879173171_7877572884250303428_n.jpg   38.94K   14 downloads

 1526475_10152632879243171_5943793466622599414_n.jpg   62.81K   37 downloads

 

holes drilled and then enlarged with a countersink drill bit.

 

rust killing epoxy base coat.

 

temp is a little low so it is taking a long time to go off.

[nicklouse]

 image.jpg   70.52K   77 downloads
 image.jpg   72.45K   50 downloads

Turrets done.

Just need to put a hole and flange in the sides.

[nicklouse]

Mmm been trying to read the rules and regs.

Interesting. Current first read looks like I might have to fit a Cat. Replace the fibre glass and carry 190kg of ballast. Ok I can go up to 1400cc as well.

I think I will need to sit down with someone who knows the rules and the language.

Next jobs are reinstating a metal floor. And redo the seat mounting frame. Then tie the rear beam into the rollcage frame a big more.

[nicklouse]

Gaskets arrive from Guessworks on Friday and today I went to put them in my gasket box.

Did not really need to order any.
 image.jpg   80.58K   28 downloads

[nicklouse]

Today I was looking at this.
 image.jpg   112.3K   88 downloads
Not much is magnetic.

Rivits for scrap.

What is the going rate for Ti?

Then I found this.
 image.jpg   65.97K   59 downloads

1980?

[coopdog]

Liking the build
Good luck with it!

[nicklouse]

Damn there is a Minimum weight limit for the class. and my car is 100kg too light.

 

and I was thinking of some nice light weight aero parts but it looks like they will need to be cast Iron!

 

oh well onward and upward.

[GraemeC]

Put that scrap in the 4X bag and strap it into the car for balast!

[nicklouse]

Well took a day off work as I need to change the front fog like and a side light on the Suzuki.

To do either of these jobs needs the front bumper to be removed.
Not been off since it was bipuilt in 2007. So just about every threaded item broke. Fun.

But after a day praying about with all that I had further thoughts on the new boot floor.

Steel going in as the car is too light for the class anyway.

 image.jpg   65.58K   38 downloads
 image.jpg   49.87K   14 downloads

[nicklouse]

Just thought I would pop up a photo of an old Skool rear lock out lever.

 image.jpg   54K   54 downloads
 image.jpg   54.89K   44 downloads

As I was cleaning the housing.

[MJWarren]

What's it weighing in at and what series are you looking at racing in?

[nicklouse]

it was weighing in at 550kg. I was Hillclimbing for a Few years and it is MSA logbooked. But I am now looking at racing Outside of the UK.

[nicklouse]

 image.jpg   54.18K   33 downloads

Boot floor getting there.

[nicklouse]

Fits sideways!
 image.jpg   68.07K   51 downloads

Edited by nicklouse, 22 February 2015 - 07:21 PM.

[Gr4h4m]

I love the look of this car. Can't wait to see it finished