Looks like too much unburnt fuel in the cat. Is it possible to run a cat successfully with a race cam and carbs?
I Decided It Was Time To Drag The Race Car Out And Update It.
Started by
nicklouse
, Sep 22 2014 10:06 PM
roundnose
910 replies to this topic
#541
imack
-
- TMF+ Member
-
- 1,973 posts
Camshaft & Stage Two Head
- Location: Orpington, Kent
Posted 04 February 2019 - 09:08 PM
#542
nicklouse
-
- TMF+ Member
-
- 18,293 posts
Moved Into The Garage
- Location: Not Yorkshire
- Local Club: Anonyme Miniholiker
Posted 04 February 2019 - 09:15 PM
Looks like too much unburnt fuel in the cat. Is it possible to run a cat successfully with a race cam and carbs?
good question regs say you have to have one. which is insane. need some heat shield for the floor.
#543
imack
-
- TMF+ Member
-
- 1,973 posts
Camshaft & Stage Two Head
- Location: Orpington, Kent
Posted 04 February 2019 - 09:47 PM
good question regs say you have to have one. which is insane. need some heat shield for the floor.
Looks like too much unburnt fuel in the cat. Is it possible to run a cat successfully with a race cam and carbs?
Are the emissions actually checked to see if the cat is working, or could you loose the innards of the cat and move it further away from the tail pipe so a scrutineer can't see that the guts are missing?
#544
nicklouse
-
- TMF+ Member
-
- 18,293 posts
Moved Into The Garage
- Location: Not Yorkshire
- Local Club: Anonyme Miniholiker
Posted 04 February 2019 - 10:07 PM
yep they check that it does something.
#545
nicklouse
-
- TMF+ Member
-
- 18,293 posts
Moved Into The Garage
- Location: Not Yorkshire
- Local Club: Anonyme Miniholiker
Posted 09 February 2019 - 11:26 PM
well all back together
#546
nicklouse
-
- TMF+ Member
-
- 18,293 posts
Moved Into The Garage
- Location: Not Yorkshire
- Local Club: Anonyme Miniholiker
Posted 15 March 2019 - 09:39 PM
been a bit quite on the car side so been sorting out the bench area
now to clean the bench.
#547
nicklouse
-
- TMF+ Member
-
- 18,293 posts
Moved Into The Garage
- Location: Not Yorkshire
- Local Club: Anonyme Miniholiker
Posted 20 April 2019 - 08:51 PM
more sorting tyre rack in
the ikea cabinet on the left is next to go as it is getting very wobbly.
the ikea cabinet on the left is next to go as it is getting very wobbly.
Edited by nicklouse, 20 April 2019 - 08:52 PM.
#548
nicklouse
-
- TMF+ Member
-
- 18,293 posts
Moved Into The Garage
- Location: Not Yorkshire
- Local Club: Anonyme Miniholiker
Posted 22 April 2019 - 12:32 AM
reader put away with its cover on.
#549
ajperry
-
- Members
-
- 316 posts
Speeding Along Now
- Location: Wokingham
- Local Club: Thames Valley Mini Club
Posted 22 April 2019 - 07:46 AM
Just read through all this. Awesome work and a hugely respectable custom fabrication project. Very cool.
When I saw this I immediately thought “now that’s hot, Batman!” Looks like the old jet at the back of the original batmobile!
might have to change something
When I saw this I immediately thought “now that’s hot, Batman!” Looks like the old jet at the back of the original batmobile!
#550
nicklouse
-
- TMF+ Member
-
- 18,293 posts
Moved Into The Garage
- Location: Not Yorkshire
- Local Club: Anonyme Miniholiker
Posted 02 May 2019 - 07:55 PM
picked up a "new" mid box. Craftsman a Sears own brand when sold. not bad for 30 notes
#551
nicklouse
-
- TMF+ Member
-
- 18,293 posts
Moved Into The Garage
- Location: Not Yorkshire
- Local Club: Anonyme Miniholiker
Posted 22 May 2019 - 06:42 PM
right back to the car.
bought some things.
#552
imack
-
- TMF+ Member
-
- 1,973 posts
Camshaft & Stage Two Head
- Location: Orpington, Kent
Posted 23 May 2019 - 05:07 AM
Been shopping at MED?
#553
nicklouse
-
- TMF+ Member
-
- 18,293 posts
Moved Into The Garage
- Location: Not Yorkshire
- Local Club: Anonyme Miniholiker
Posted 23 May 2019 - 07:11 AM
Been shopping at MED?
and else where. bought something I said I would do over 20 years ago.
#554
nicklouse
-
- TMF+ Member
-
- 18,293 posts
Moved Into The Garage
- Location: Not Yorkshire
- Local Club: Anonyme Miniholiker
Posted 23 May 2019 - 07:08 PM
so as some of you may remember from the start of this thread i looked after this car
a bit quick and held its class record for about 12 years.
well in 95/6 we fitted an ignition system to it and i kept the "card" that came with it.
roll on to 2014 where i find out if he is still making them yes.
today i am rather happy.
#555
nicklouse
-
- TMF+ Member
-
- 18,293 posts
Moved Into The Garage
- Location: Not Yorkshire
- Local Club: Anonyme Miniholiker
Posted 24 May 2019 - 12:32 AM
TPS just ordered. **** just got serious.
Also tagged with one or more of these keywords: roundnose
Projects →
Mini Saloons →
1965 Austin Mini Restoration - Canadian Mk1Started by DoubleEh , 14 Nov 2022  roundnose
|
|
|
||
Projects →
Mini Saloons →
Project Joe - 1991 Mini Mayfair 998Started by Eggers , 02 Jun 2022 roundnose
|
|
|
||
Projects →
Mini Saloons →
Mpi Dashboad ProblemStarted by mikeprez , 22 Dec 2021 roundnose
|
|
|
||
Projects →
Mini Saloons →
1978 Oew - Willy The MiniStarted by smalltreegrower , 11 Nov 2021 roundnose
|
|
|
||
Projects →
Mini Saloons →
1968 Mk2 Cooper BuildStarted by Minime998 , 15 Sep 2021 roundnose
|
|
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
