First bit of new metal fitted next is the new hinge stiffener panel and then the flitch
Attached Files
Edited by stumpypower, 17 June 2014 - 01:57 PM.
Posted 17 June 2014 - 01:31 PM
First bit of new metal fitted next is the new hinge stiffener panel and then the flitch
Edited by stumpypower, 17 June 2014 - 01:57 PM.
Posted 17 June 2014 - 01:32 PM
Ooops try again
Edited by stumpypower, 17 June 2014 - 01:36 PM.
Posted 17 June 2014 - 01:39 PM
Pic
Edited by stumpypower, 17 June 2014 - 02:03 PM.
Posted 17 June 2014 - 02:05 PM
I was going to trim the panel down a bit on the a pillar but could feel a lil pitting up inside so decided to use the full piece will be cutting the lower quarter panel out at some point to replace that section so will finish that part of the welding to the doorstep then
Edited by stumpypower, 17 June 2014 - 02:12 PM.
Posted 17 June 2014 - 04:57 PM
Apart from the genuine heritage door pillar and door step the rest of the panels I got were magnum all from mini machine not happy with the quality on them on can't see me using them to be honest
Edited by stumpypower, 17 June 2014 - 05:08 PM.
Posted 18 June 2014 - 09:43 AM
Posted 18 June 2014 - 10:27 AM
Apart from the genuine heritage door pillar and door step the rest of the panels I got were magnum all from mini machine not happy with the quality on them on can't see me using them to be honest
which panels did you get from m-machine
Posted 18 June 2014 - 02:57 PM
hi mate i got the door step and pillar heritage panel
2 flitch panels.
a door step with lower quarter ....
a post stiffener
and a lower quarter (arch to door) every panel was magnum except for the heritage pillar and step
Posted 18 June 2014 - 05:45 PM
look at the door step lower 1/4 there is no join where the rear 1/4 fits over the step
Posted 18 June 2014 - 06:02 PM
no i noticed ime not using it ime going to get another door pillar and step and start as i mean to go on. the other thing ive been wondering the top dash rail does that panel come with the windscreen rubber lip ? it looks as if its one piece to me
Posted 18 June 2014 - 06:06 PM
it should be separate mine does not have one put up a pic please
Posted 18 July 2014 - 09:38 AM
Posted 18 July 2014 - 09:43 AM
Edited by stumpypower, 18 July 2014 - 09:59 AM.
Posted 18 July 2014 - 10:00 AM
Posted 18 July 2014 - 10:01 AM
Edited by stumpypower, 18 July 2014 - 10:01 AM.
0 members, 1 guests, 0 anonymous users