2 replies to this topic

[cooperhawk]

Hi everyone I put in a new rod change seal in  and now difficult to select a gear or even put it back into nutral.I've bled the clutch checked the clutch throw out gap (6.5mm) and I am at witts end as to what it can be. Any ideas anyone.

Edited by cooperhawk, 15 February 2014 - 06:31 PM.

[bikenutmart]

Did you also replace the rubber gaiter, if so this can make gear selection difficult, i had to trim mine a bit to get all the gears. Hope this helps. Martin.

[cooperhawk]

I did put in a new rubber gaitor I'll try that tommorow thanks Martin