Looking very good!
The Van
Started by
Tom Sanderson
, Dec 29 2013 09:47 PM
412 replies to this topic
#91
RossKnight
-
- Members
-
- 2,539 posts
One heck of a member
- Location: Hampshire or Surrey
- Local Club: JKSA MOC
Posted 12 March 2014 - 08:08 PM
#92
Tom Sanderson
-
- Members
-
- 708 posts
One Carb Or Two?
- Location: North Lincolnshire
Posted 15 March 2014 - 07:28 PM
Using CAD (that's cardboard aided design) I made up the strengthning plate that sits on the outer end of the front cross member. I used 3mm steel which was probably thicker than standard but that's good, anyway I first made a template
Then I made it in steel
The spot welder I have isn't powerful enough for the thick stuff so I had to plug weld it
Then the inner wing went on
Same at the other side now :)
Then I made it in steel
The spot welder I have isn't powerful enough for the thick stuff so I had to plug weld it
Then the inner wing went on
Same at the other side now :)
Edited by Tom Sanderson, 15 March 2014 - 07:34 PM.
#93
Rocket.
-
- Members
-
- 1,441 posts
One Carb Or Two?
- Location: UK
Posted 15 March 2014 - 08:08 PM
Great work !
#94
leeuk
-
- Members
-
- 681 posts
Super Mini Mad
- Location: Wednesbury
Posted 16 March 2014 - 01:49 AM
Looking very good mate and speedy progress too 
#95
RossKnight
-
- Members
-
- 2,539 posts
One heck of a member
- Location: Hampshire or Surrey
- Local Club: JKSA MOC
Posted 16 March 2014 - 01:51 AM
If Carlsberg did minis...
#96
SAL 821X
-
- Members
-
- 1,890 posts
Camshaft & Stage Two Head
- Location: Hinckley
- Local Club: Leicester Mini Owners Club
Posted 17 March 2014 - 09:45 AM
lubberly jubberly...
#97
Tom Sanderson
-
- Members
-
- 708 posts
One Carb Or Two?
- Location: North Lincolnshire
Posted 22 March 2014 - 06:28 PM
A few pictures of the same thing at the other side
Also got these seat belt anchor mounts off eBay
Also got these seat belt anchor mounts off eBay
#98
mattmiglia
-
- Members
-
- 515 posts
Super Mini Mad
- Location: West Midlands
Posted 22 March 2014 - 09:42 PM
Brilliant work! One day I'd love to tackle a van. Big respect for doing it properly
#99
Bonkys van
-
- Noobies
-
- 56 posts
Stage One Kit Fitted
- Location: Ascot
Posted 30 March 2014 - 07:00 PM
It's all about the vans. Looking forward to following this one.
#100
Tom Sanderson
-
- Members
-
- 708 posts
One Carb Or Two?
- Location: North Lincolnshire
Posted 08 April 2014 - 05:37 PM
Oops double post.
Edited by Tom Sanderson, 08 April 2014 - 05:39 PM.
#101
Tom Sanderson
-
- Members
-
- 708 posts
One Carb Or Two?
- Location: North Lincolnshire
Posted 08 April 2014 - 05:37 PM
Very small update, I have got the jacking point and seat belt anchor in place and welded up now.
#102
SAL 821X
-
- Members
-
- 1,890 posts
Camshaft & Stage Two Head
- Location: Hinckley
- Local Club: Leicester Mini Owners Club
Posted 09 April 2014 - 09:06 AM
cracking stuff Tom.
#103
Covert
-
- Members
-
- 526 posts
Super Mini Mad
- Location: Northampton
Posted 09 April 2014 - 10:38 AM
Loving this , proper build !
#104
minimikej
-
- Members
-
- 347 posts
Speeding Along Now
- Location: Derbyshire
Posted 12 April 2014 - 11:50 PM
Just fantastic. I love this approach compared to the 'hog roast' spit. Good job your car was square to start with :)
#105
Tom Sanderson
-
- Members
-
- 708 posts
One Carb Or Two?
- Location: North Lincolnshire
Posted 13 April 2014 - 05:47 AM
Yeah, I've done a few measurements and it all seemed good. So far everything has lined up perfectly although I'm sure the genuine panels are helping that matter!
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users
