1238 replies to this topic

[STREET TWEAKS]

thanks mate got one for the n/s i think which looks like the bad side

[STREET TWEAKS]

door repair lots of pics











so booked the afternoon off work as we had not got alot on i started work back on toms o/s door , this one out of the two looked the best ( wrong ) this is the one with the stuck screw lol . so after cutting the skin off and drilling the screw out and retaping the thread , i cut off the lower frame and a pice of thin metal where the lower hinge was. uesing an old door off my mini i cut a pice out of that to make the hinge part strong again and fitting the new lower panel i tack it all in place . ( then i test fitted the door skin all good ) so fully welded it all in place.

[ToM 2012]

wow! did not fink they was that rusty at the bottom lol goes to show what lies behind the skins looks cracking tho mate

[STREET TWEAKS]

today i fitted the door skin ( that fits great ) just sum small dents to fill and the inside of the frame then thats finnished

so i started on the bonnet , tom asked me to weld the holes in the bonnet , so i welded them inside and out , sanding all the weld down and a quick sand of the outside of the bonnet and a bit of primer inside 2moza

[ToM 2012]

that look cracking can not wait now to give you the mini lol lovely job mate

[STREET TWEAKS]

that look cracking can not wait now to give you the mini lol lovely job mate

thank you

[minimuk]

well what can I say,....nout.....Looks Ace Wayne, Tom you are a lucky man!!

[STREET TWEAKS]

well what can I say,....nout.....Looks Ace Wayne, Tom you are a lucky man!!

thank you long way to go yet lol

[ToM 2012]

thankyou

[STREET TWEAKS]

well tom poped up to see me and give me the new lower panel , so he got to see me at work on his doors.

so with all the old rust and door skin cut off , i cut the new panel and tacked it in place.

[grahama]

Lovely repairs, wish I had just got a lower section for mine now, so much neater. Still you live and learn !!

[STREET TWEAKS]

today hell what a day lol

got up at 5am this mornig as we have lots on at work , so 2nite i got 30 mins to finnish the welding . BUT we most of left sum thinners rags on the table at sum time in the day , so when i started welding ( hell the table whent up in flames in the unit ) so i droped the door on the floor picked up the table and ran outside as fast as i can , when i turn around to look back my boss is on the floor weting himself and started singin the song ( iam on fire ) and ( hoooo my tables on firrrreer ) so now with all the flames out i welded the door up ( out side )

[STREET TWEAKS]

Lovely repairs, wish I had just got a lower section for mine now, so much neater. Still you live and learn !!

i have a spaire one for sale mate if you need one ?

[hughJ]

What nice repairs. That looks like quite a blaze you had!!

Hugh

[STREET TWEAKS]

What nice repairs. That looks like quite a blaze you had!!

Hugh

yes it was i **** my self lol