1238 replies to this topic

[ToM 2012]

thanks benjy18 im just going to be using it to drive and go to meets and shows ect

[ToM 2012]

thanks miniftw cant wait to have it sitting on all 4 wheels

[ToM 2012]

not much off update today but have been spending been up mini spares and got my self 2 front hub seal kits / 12" to 10" brake conversion kit / 2 swival pin kit (ball joints) / tie rod bar kit / lower arm bush upgrade / 2 lower arm pins.just taken front hub bearing seal kit and ball joint to a chap ino so they will be fitted and ready in the morning will get some pics tomorrow does anyone no if i can get a upper arm repair kit from car spares or so on ?? as mini spares have not got this in stock till next friday and i cant wait this long lol cheers tom

[ToM 2012]

ok update today got new tie bars fitted and lower arms also painted some items been and got my hubs from my mate with new bearings and ball joints here are some pics let me no what you fink thankyou tom





also got some black shrink rap and put these on the tabs around the engine bay as when they will be bent to hold wiring loom paint will come off comments welcome thanks tom

[ToM 2012]

[ToM 2012]

hopefully will be back on all 4 wheels tomorrow

[Andrew O]

Remeber to get your upper shock mount on because it can be a nightmare if the threads are knackerd ( As i found out )
Parts look nice ;)

[ToM 2012]

cheers mate you reckon i should put this on first??

[2-alex-2]

i put my shock mounts on first as well

[Andrew O]

In my opinion yes as it will make your life easier

[ToM 2012]

cheers guys

[ToM 2012]

anyone give me driveshaft retaining nut torque setting and also for the rear to ??

[minimuk]

Certainly a sexy kit there Tom looking good, will get you those settings in a bit,...

[ToM 2012]

cheers mate

[minimuk]

cheers mate

Haynes,....
Drive Shaft retaining nut, drum brakes.....83Nm
Disk Brake Drive Shaft retaining nut with multiple split pin holes in drive shaft,...207Nm
Disk Brake Drive Shaft retaining nut with single split pin hole in drive shaft,....255Nm