right hi again all, another solid day working on this install lol first off we finished of the enclosure by fixing on the top, cutting out the hole for the sub, feeding the wire through and leaving all the silicone to dry
then we fitted the amp to the bulk head a wired it all up to the variable side of the isolator and ran the rca cable though the cabin (round the gap between the rear seat back and the quarter panel - don't worry i've made sure it is protected from sharp edges and curves round bends rather than kinks) you can see the bullet connectors on the speaker wire by the arch which will make for quick removal if i need the extra boot space for whatever reason
the amp has been mounted over the recess in the the rear bulkhead to get some extra clearance for cooling
then we wrapped the box in the same carpet as the boot and rear speaker board
and then finally fitted the woofer - very snazzy i think
just as we were finishing off fitting the sub my neighbourgh came over and gave me this
been sat in his loft for a while and just let me have it and it's a 12 inch .... typical
any one know anything about the brand or specs of the sub ? anyway we put the sub box in, its a tight fit but it is removable - just
and put all my spares, jack a tools back in and well it's safe to say no big shopping trips with the sub in situ lol
we then went to give it a test, the radio came on and set it to enable the sub and..... nothing
after fiddling around with fixings and connectors we called it a night - gutted
however, after looking back through every line of the radio and amp booklets i think i may have found the problem - someone (not naming names here) has forgot to wire in the remote antenna feed that tells the amp to switch on
oops
luckily there is one built into the beading that separates the rca positive and negatives so the wire is already in place and just needs extending and connecting. looks like
i have err i mean who ever forgot this has got away with their mistake lol
so unfortunately no video of panel rattling yet but it will get done, i just want to here my new toy for the first time now
Rhys