3581 replies to this topic

[Driezzie]

too bad they don't make those wheels anymore.

 

[iTomKart]

Must be massive cats eyes if you're hitting them haha

35mm minus the amount the suspension travel on a motorway at 70mph.
Did you think before that useful post?

Wow how much downforce are you running for the suspension to compress 30mm at high speed?

Did you think before you posted silly waffle about how low you claim to be? Minus scene points, smh

[Bungle]

nicked from else where on this site

 

 

go for it boys

[chrisj]

ow man I almost came !!! <3 <3 Rare SSR ? 
 
there is also a black mini around with freshly banded steels (6,5) in white, saw it on Facebook a few days back.

Possibly my new favourite Mini.

[Daviewonder]

Now that really is a thing of beauty  

[alex-95]

A couple more of the blue one

[joeyfinneran]

Are they 10x7 ;)
I wish i had the money for 10x7 they give mini such stance ;)

[Minuki]

Not sure if they're SSR's, but definitely an old set of Japanese wheels, almost look like old Enkei mesh wheels

[adam_93rio]

Must be massive cats eyes if you're hitting them haha

35mm minus the amount the suspension travel on a motorway at 70mph.
Did you think before that useful post?

Wow how much downforce are you running for the suspension to compress 30mm at high speed?

Did you think before you posted silly waffle about how low you claim to be? Minus scene points, smh

This is when I tried to measure the distance from the floor of my car to the concrete. It's a 50mm tape measure and only just fit under the floor, exhaust is about 3/4 the way up the tape measure. My arm only just wedged under the gearbox to take this. This was also before I did more work to remove the wheel spacers on the front which then allowed me to go lower.

And my front wheel gap since it has been lowered down again.


And by the way, cats eyes aren't flush with the road, so where I said 35mm minus the suspension travel, and roads aren't flat either. especially with the state the motorways are in round here

Is this enough proof? Or would you like to keep arguing about a car you've never seen before?

Edited by adam_93rio, 23 June 2013 - 11:21 PM.

[adam_93rio]

nicked from else where on this site
 

 
go for it boys

How would these even fit?
At first glance I thought they were just wheel spacers then looked again and thought 'that's gonna cause some wheel wobble

[rally515]

 

nicked from else where on this site
 

 
go for it boys

How would these even fit?
At first glance I thought they were just wheel spacers then looked again and thought 'that's gonna cause some wheel wobble

 

 

HAHA, yeah at shows you'd have to fit them and rotate all four wheels for neg camber, unless these start a new "RANDOM CAMBER" fashion going

Would team well with a rat look mini

[Mini 360]

They are wheel spacers......fail worthy ones though haha!

[adam_93rio]

So they're actually just to put on at shows or when the car is parked up? That's the only time they'd give you camber, other than when moving you'd get camber every half turn of the wheels.

If you had them just for shows, then you might as well just undo your wheel nuts

[rally515]

 other than when moving you'd get camber every half turn of the wheels.
 

 

 Hahaha, think its a nice crazy idea off a fellow tmf member that he did at work i think (saw the thread today)

[Driezzie]

Force racing should start with mesh designs, it would be gold !