My 998 Turbo
#601
Posted 07 September 2014 - 07:06 PM
Will ring them in the morning and see if they can book me in for later that day
#602
Posted 08 September 2014 - 03:39 PM
Thought I'd get it all ready to go, got it up to temp extra,
No leaks
Drove it a bit further and sometimes it didn't want to rev,
Parked it up an let it idle and the oil started coming,
Put it up on some ramps and yep once again oil dripping from the turbo
Rang midland turbo and they are having another look at it, if it's fine I'm going to fit a scavenger pump and not have to worry about bad oil drain problems :)
#603
Posted 10 September 2014 - 02:37 PM
sorted out my ride height today :)
before:
now:
i wanted it like this but the passenger side wouldnt go low enough
#604
Posted 10 September 2014 - 03:37 PM
#605
Posted 10 September 2014 - 05:04 PM
Surely that's resting on the bump stops?
In the last pic?
It's not like that, it's sitting at just above 2 fingers arch gap
#606
Posted 11 September 2014 - 06:49 PM
all back together and seams to be running well :)
oil pressure is a bit high i think, its at
60psi cold
40-45psi at hot
60psi when revved
no leaks yet
#607
Posted 11 September 2014 - 06:50 PM
#608
Posted 11 September 2014 - 08:23 PM
#609
Posted 11 September 2014 - 08:25 PM
plus 1 tappety
#610
Posted 11 September 2014 - 08:28 PM
#611
Posted 12 September 2014 - 07:40 AM
Tappety?
plus 1 tappety
+2
I set them before but I've stripped it twice since then :L
Will reset it all when I know the car is running :)
#612
Posted 12 September 2014 - 07:42 AM
Oil pressure's ok, interesting what happens when you take it for a blast and quickly pull up at traffic lights, about 15 psi I'd imagine, as you'll know, don't fret when this does happen, especially with a turbo
That's good to know then :)
#613
Posted 12 September 2014 - 12:36 PM
OMG I DROVE IT
OH MY GODDDDD
SUCH BOOST
AND TURBO FLUTTER MMMMMMMMMMMMMMMMMMMM
MUCH TORQUE STEER
#614
Posted 12 September 2014 - 02:24 PM
mot has been booked for monday morning :)
#615
Posted 12 September 2014 - 03:18 PM
Bonnet fits well m8
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users