Jump to content


Photo

1987 Mini Mayfair Shell & Lots Of Parts


  • This topic is locked This topic is locked
3 replies to this topic

#1 LouisT

LouisT

    Mini Mad

  • Members
  • PipPipPipPip
  • 197 posts
  • Location: Manchester

Posted 19 October 2011 - 04:43 PM

Hi Guys,

i'm selling my MINI project as i have given up and lost all interest.

The shell itself is a 1987 MINI Mayfair in red with a grey roof.

I started to cut all the rot out and i think seeing it like that has put me off finishing it.

I have all the new panels to go with it and a whole load of parts aswell.

Here's the list:

-998 engine complete, incl... radiator, fan, ht leads, carb and K&N Filter... everything.
Subframe still has tie rods arms, hubs brakes, discs, steering rack, which will need new boots. etc etc everything,
I just dropped the whole subframe with engine still attatched,
I'm up at the garage today, so i can get some pics of it.
The clocks in the car say 55k, but im unsure on what miles the engine has done.

2 rot free doors in british racing green, couple of dents

a rot free sidewalk bootlid

shell with v5 1987 mayfair (few panels need to be welded in, but i have all panels listed below)

1987 mayfair bonnet in red (cross member has rusted through on one corner)

1987 mayfair bootlid in red (some rust)

1987 mayfair doors in red need welding at bottom

minitec front flip hinges

brand new n/s rear quarter

brand new o/s rear quarter

brand new scuttle end

brand new scuttle end

brand new under scuttle

brand new under scuttle

brand new n/s flitch panel

brand new o/s flitch panel

brand new o/s door post

brand new n/s door post

brand new o/s Door step

brand new n/s door step

brand new o/s inner rear arch

brand new n/s inner rear arch

brand new n/s inner sill

brand new genuine waist rail n/s

brand new o/s a panel

brand new n/s a panel

brand new boot floor repair panel

rear subby is still attatched to the shell

3 peice clocks show 55k

Piano Black dash
Fuel Tank

rear and rear quarter windows

Standard seats from a 1987 Mayfair, covered in black leatherette, both front and rear

And finally 12x5" minilife alloys

They have white centres and a diamond cut outer lip on them 12 x 5"

The tyres are very very good on them,

Heres a few pictures for you.

Posted Image

Posted Image

Posted Image

So a right good project for someone if you have got the time and dedication for it.

I'm after £850, which i think is fair considering all the parts etc.

I'd rather it go as a job lot to save a lot of hassle for myself,

but the mini tec hinges, 2 mint doors, boot, solid front subframe come in around £400 for second hand bits.

ANy questions please ask. or text me or email me at [email protected] / 07845645920

Cheers Louis

#2 ANON

ANON

    More Jammy than a Jammy dodger.

  • Traders
  • PipPipPipPipPipPipPipPipPip
  • 2,682 posts
  • Location: my house
  • Local Club: pony

Posted 19 October 2011 - 07:48 PM

genuine panels or spurious?

#3 MIGLIACARS

MIGLIACARS

    Up Into Fourth

  • Traders
  • PipPipPipPipPipPipPipPipPip
  • 2,057 posts

Posted 19 October 2011 - 09:19 PM

Hi Guys,

i'm selling my MINI project as i have given up and lost all interest.

The shell itself is a 1987 MINI Mayfair in red with a grey roof.

I started to cut all the rot out and i think seeing it like that has put me off finishing it.

I have all the new panels to go with it and a whole load of parts aswell.

Here's the list:

-998 engine complete, incl... radiator, fan, ht leads, carb and K&N Filter... everything.
Subframe still has tie rods arms, hubs brakes, discs, steering rack, which will need new boots. etc etc everything,
I just dropped the whole subframe with engine still attatched,
I'm up at the garage today, so i can get some pics of it.
The clocks in the car say 55k, but im unsure on what miles the engine has done.

2 rot free doors in british racing green, couple of dents

a rot free sidewalk bootlid

shell with v5 1987 mayfair (few panels need to be welded in, but i have all panels listed below)

1987 mayfair bonnet in red (cross member has rusted through on one corner)

1987 mayfair bootlid in red (some rust)

1987 mayfair doors in red need welding at bottom

minitec front flip hinges

brand new n/s rear quarter

brand new o/s rear quarter

brand new scuttle end

brand new scuttle end

brand new under scuttle

brand new under scuttle

brand new n/s flitch panel

brand new o/s flitch panel

brand new o/s door post

brand new n/s door post

brand new o/s Door step

brand new n/s door step

brand new o/s inner rear arch

brand new n/s inner rear arch

brand new n/s inner sill

brand new genuine waist rail n/s

brand new o/s a panel

brand new n/s a panel

brand new boot floor repair panel

rear subby is still attatched to the shell

3 peice clocks show 55k

Piano Black dash
Fuel Tank

rear and rear quarter windows

Standard seats from a 1987 Mayfair, covered in black leatherette, both front and rear

And finally 12x5" minilife alloys

They have white centres and a diamond cut outer lip on them 12 x 5"

The tyres are very very good on them,

Heres a few pictures for you.

Posted Image

Posted Image

Posted Image

So a right good project for someone if you have got the time and dedication for it.

I'm after £850, which i think is fair considering all the parts etc.

I'd rather it go as a job lot to save a lot of hassle for myself,

but the mini tec hinges, 2 mint doors, boot, solid front subframe come in around £400 for second hand bits.

ANy questions please ask. or text me or email me at [email protected] / 07845645920

Cheers Louis





were are you based

#4 LouisT

LouisT

    Mini Mad

  • Members
  • PipPipPipPip
  • 197 posts
  • Location: Manchester

Posted 20 October 2011 - 06:50 PM

there not genuine panels, they are magnum panels, the only geniune one is the waist rail.

I'm based in Glossop (Derbyshire)

Cheers, Louis




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users