Hey, anyone know what size the bolts are that hold the starter motor to the case? looked on minispares but couldnt find a bolt for that pacific purpose
cheers
Mike
Starter Motor Bolt Size...
Started by
MiniMike87
, Jul 26 2011 06:50 PM
6 replies to this topic
#2
new_zealand _minis
-
- Members
-
- 654 posts
Super Mini Mad
- Local Club: wellington new zealand
Posted 26 July 2011 - 06:59 PM
14mm or 9/16
#3
bmcecosse
-
- Members
-
- 9,699 posts
Crazy About Mini's
- Local Club: http://www.srps.org.uk/
Posted 26 July 2011 - 07:14 PM
The HEAD size is 9/16 AF- certainly NOT 14mm - don't use metric spanners on imperial nuts/bolts. The thread size is 3/8" UNC.
Edited by bmcecosse, 26 July 2011 - 07:19 PM.
#4
MiniMike87
-
- Noobies
-
- 123 posts
Mini Mad
- Location: Deal, Kent
Posted 26 July 2011 - 08:10 PM
Great thanks guys, 3/8" UNC was what i was after 
thanks again
thanks again
#5
MRA
-
- Banned
-
- 7,607 posts
Previously known as 'mra-minis.co.uk'.
- Location: Due to move again....
Posted 16 August 2011 - 09:22 AM
The length is 1.25" .....
Edited by mra-minis.co.uk, 16 August 2011 - 09:34 AM.
too many 1's
#6
L400RAS
-
- Traders
-
- 2,479 posts
Up Into Fourth
- Local Club: Lincolnshire Mini Owners Club
Posted 16 August 2011 - 09:31 AM
somerford link
2 Screws required. Each require plain washer and locking washer.
Edit:
MRA minis link - (slightly different part number...although the htm page is named 6101...)
2 Screws required. Each require plain washer and locking washer.
Edit:
MRA minis link - (slightly different part number...although the htm page is named 6101...)
Edited by L400RAS, 16 August 2011 - 09:37 AM.
#7
MRA
-
- Banned
-
- 7,607 posts
Previously known as 'mra-minis.co.uk'.
- Location: Due to move again....
Posted 16 August 2011 - 09:33 AM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
