Its an inspection hole.....errrrr......for inspecting!! Done on purpose of course!

Road Rally Mini Project
#481
Posted 20 May 2013 - 08:50 PM
#482
Posted 20 May 2013 - 09:00 PM
#483
Posted 20 May 2013 - 10:02 PM
Nice feature...!!
#484
Posted 20 May 2013 - 10:38 PM
#485
Posted 20 May 2013 - 10:42 PM
#486
Posted 22 May 2013 - 11:05 PM
Finally got the distributor fitted, put some oil in the engine and the rocker cover leaked oil down the back !!
I will have to get a new gasket from work tommorrow
Next put some brake fluid in and that leaked on the union under the clutch housing, brake fluid everywhere! Tighten that up and sorted the problem then found one of the rear unions had also leaked on the floor. That was tightened and the mess cleaned up. Then I went to bleed the clutch only to find I hadn't connected the clevis pin on top of the pedal. With all the other stuff now in the car it was a struggle
As I said a testing night!
#487
Posted 23 May 2013 - 05:45 AM
With nights like them, there is only one solution! Crack open a tinny, sit back and relax!
#488
Posted 23 May 2013 - 09:32 AM
And thats how my night finished!!!!!!!!!
#489
Posted 23 May 2013 - 11:44 AM
Lol I put it down to turning 40 a couple of weeks ago lol
They say life begins at that age...Though I personally haven't seen any evidence of it yet for me
#490
Posted 23 May 2013 - 10:07 PM
Now I know there's discussions about wether to wrap exhausts or not but I have, rightly or wrongly time will tell
Though I did wet it first and used cable ties to hold it in place until it was all done( these were removed once the steel clips were fitted)


#491
Posted 24 May 2013 - 02:52 PM
#492
Posted 25 May 2013 - 12:48 PM
Standard fuel pump???
#493
Posted 25 May 2013 - 02:05 PM
Yeah, i believe they are ok for engines up to 100bhp and ive never had one let me down, whereas the electric one i had did
#494
Posted 25 May 2013 - 04:00 PM
Yeah, i believe they are ok for engines up to 100bhp and ive never had one let me down, whereas the electric one i had did
mmmmm........controversial......but sound arguement.
#495
Posted 26 May 2013 - 09:10 AM
Had an hour free after I finished work yesterday so I plumbed in the heater connections I had made

1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users