530 replies to this topic

[minilee94]

Oh right okay I never knew that does the release bearing normally have a lot of play on the plunger

[minilee94]

Set my dizzy up today run into abit of a problem though withe the dizzy drive the bigger half moon on the spindle should be at around 11 o'clock and then once fitted dizzy the rotor arm should face around 1 o'clock but there is no way I can get the spindle at 11 o'clock and arm at 1

So spoke to bill Richards and he has said the aldon dizzy has been put together incorrectly from factory but has basicly said it's fine to fit it aslong as the rotor arm is at 1 o'clock

[minilee94]

Fitted my weber box today and I Gota say never ever fitting another one ever again lol

[RossKnight]

that looks mental!

[minilee94]

Cheers mate should have it running by June guna have a massive spend up at Brighton

[Rocket.]

shame you have to cover those rockers up

[minilee94]

Yeah I'd love to be able to make a clear rocker cover and it stay clear

[Rocket.]

Yeah I'd love to be able to make a clear rocker cover and it stay clear

 

That would be cool

[minilee94]

Yeah would be cool

[minilee94]

As my engine bay at the moment fitted the coil sort of lol and fitted my brake servo bracket

Also Gota re route all my wiring ohh joys

Edited by minilee94, 07 April 2014 - 07:44 PM.

[minilee94]

Fitted oil pressure hoses today fitted my gear selector sleeve and guess what I have

All 4 gears and reverse :)

And fitted the box in temporary need some nice near bolts and I have some of that glue stuff they tend to glue cars with now days to glue the box in aswell as bolting it in re routed all the wiring

[minilee94]

Ordered my oil cooler just Gota wait for l2b to buy starter rat etc can't wait

[minilee94]

Fitted oil cooler just waiting a 11/16s female to a male 1/4 npt adaptor for my oil filter housing then oil hoses are done

Also fitted hi torque starter motor = pig to fit

Wire up my distributor and coil sorted out a few wire that way hanging about
Also converted from ballast to non ballast ignition just need to run a ignition live from fuse box to + on the coil

[Rocket.]

Looking good ! I really like the oil cooler

[minilee94]

Cheers mate getting there :) slowly but surely