123 replies to this topic

[Brams96]

Hey Ruckus, saw your car at the stands in Brighton & it was looking as good as always. I noticed you have now got a RF processor below the switch panel, is that a new addition?

I didn't even know there was a sound off at Crystal Palace? Where was it set up? I would have entered my car if I'd known where it was as I've doubled the power to the sub & fronts now so would like to know what it's pushing. I got 125.6dB from a single 10" last year at the SMD, so am interested to see what it is now.

Edited by Brams96, 21 May 2011 - 09:56 PM.

[Ruckus]

Hey Ruckus, saw your car at the stands in Brighton & it was looking as good as always. I noticed you have now got a RF processor below the switch panel, is that a new addition?

I didn't even know there was a sound off at Crystal Palace? Where was it set up? I would have entered my car if I'd known where it was as I've doubled the power to the sub & fronts now so would like to know what it's pushing. I got 125.6dB from a single 10" last year at the SMD, so am interested to see what it is now.

LOL i did post in this section about the sound off and in the Meets section... i tried..

And nope I've always had the EXP2 but in the old car the RDAT (control unit) was mounted on the center console, Which i dont use anymore.

Shot of the old car a long time ago...

[sixtyeight]

Hi Mr Ruckus,

do you have any more photos of your subwoofer enclosure, out of the car?

Cheers

Tim.

[matty1275]

i have a question, couldnt that it had already been asked. How much sound deadening did you buy, like square metres? just like to know so i can work out how much i will need.

[Ruckus]

i have a question, couldnt that it had already been asked. How much sound deadening did you buy, like square metres? just like to know so i can work out how much i will need.

84 SQ.FT.... loads LOL

48sq ft of Dynamat Superlite
36sq ft of Dynamat Extreme

[Ruckus]

Hi Mr Ruckus,

do you have any more photos of your subwoofer enclosure, out of the car?

Cheers

Tim.

Yes, i'll dig them out...

In fact there is a build guide on a couple of other forums.. i try and get a link.

[Ruckus]

Hi Mr Ruckus,

do you have any more photos of your subwoofer enclosure, out of the car?

Cheers

Tim.

Yes, i'll dig them out...

In fact there is a build guide on a couple of other forums.. i try and get a link.

Found it... On here! LOL

http://www.theminifo...showtopic=93783

When the enclosure was moved across to the new mini it was changed a little.

The original panel was cut out to leave a 60mm ‘Frame’ and a new front panel made from 18mm MDF was put over it.
This was also routed on the face out so the sub sits a little counter sunk.

I needed to add a little capacity to the enclosure and beef up the panel as the new Seas sub is heavier and it running with a lot more power than the original RF Audiophile sub.

Edited by Ruckus, 06 June 2011 - 11:12 AM.

[m0useYy]

Saw your car at L2B, it's insane! Do you work at Croydon Minis then?

[Ruckus]

Saw your car at L2B, it's insane! Do you work at Croydon Minis then?

LOL Thanks

Nope Russel the owners Son is one of my best mates.

The mini is with them now having Throttle bodies, Suspension, and other 'S'ish tweaks

[Sam Walters]

Good bit it work, but for the love of god sort out that bodge involving dog bowls!

[Ruckus]

Good bit it work, but for the love of god sort out that bodge involving dog bowls!

LOL bodge? what else do you suggest ? I'm not welding..

This was something thought about for a while and discussed with others, not bodged?

[minilester]

Good bit it work, but for the love of god sort out that bodge involving dog bowls!

LOL bodge? what else do you suggest ? I'm not welding..

This was something thought about for a while and discussed with others, not bodged?

nee-naw nee-naw...
"pull over sonny..."
"what officer?"
"you know dogging is ilegal and carries a very heavy fine dont you?"
"but officer, i havent been dogging..."
......
..........
..............
..................
......."...care to explain the bowls then?"




ROFLYSST........ im very sorry to everyone who just read this... im on a sugar rush again...

[Ruckus]

minilester I'm yet to see any post from you in this ICE Help and advise section that is helpful or advise...

Its all been child like Dribble is this the level we should expect from you?

[Sam Walters]

Why not welding?

Can i pinch this idea Ruckus? im on the understanding that the rover cabriolets have something like this.

I shall be concluding my project that i started ages ago with a slightly new take on it all......

Ill also be turning my car into a bumble bee.

[minilester]

minilester I'm yet to see any post from you in this ICE Help and advise section that is helpful or advise...

Its all been child like Dribble is this the level we should expect from you?

pretty much... im not a very serious person as is and i thought you's lot had a sence of humour...

.. i was sadly mistaken!

i have not at any point in your thread said anything nasty to anyone.. nore been rude.. nore have i started an arguement with any one..

some one thought your dog bowl idea was a little "left field" and you replied to them.. i make one little joke about it and IM THE BAD GUY!..

... its joking around.. having fun in what you do that makes it all the more fun!, it makes people think up stupid things.. makes them come up with wacky ideas!

.. lighten up.. if it wasnt for silly ideas you would never had come up with the bowl idea


... see theirs some-one with a sence of humour bursting to get out of you, let him out to play some time.

peace and love folks!