7 replies to this topic

[garrett3]

Ravern Hydraulics suspension parts

Condition:used good
Location: Norfolk

Rayvern Hydraulics kits now cost sround £1200 and up for a complete kit. Yes the hight adjustable on a switch system.

I have a part kit from my old mini that sadly was written off due to fire. (not the fault of the hydraulics)



I have:

Complete pump with actuator solenoid etc
Mixing block/valves (plastic top valve covers have heat damage but not seen when fitted)
Rear rams.
Drop/lift hydraulic speed adjuster union
Pump to mixer/valve block hydraulic line

To complete the kit you will need:

Front rams (rayvern hydraulics supply these)
Hydralic pipes (cheap on ebay)
Switch box (not supplied in kit from RV anyway but easy to make and I can tell you how)
Battery deep cell type (not supplied by RV but readily available on ebay, cheaper to buy leisure batteries)

I have the most expensive parts and the rest you can get together for a couple hundred or so if you are clever.

Someone on ebay is selling just a pump for £250 so I know this is a bargain. The value of the above is prob £600-800 new.

I can help with wiring diagrams and fitting advice, IF YOU CAN FIT HI-LO'S YOU CAN FIT THIS KIT.

Seen here:

http://www.rayvernhy...folio/Juice/229

Collection preffered as heavy but will help arrange a courier if needed.

Edited by garrett3, 14 January 2011 - 04:23 PM.

[minisprint]

I have:

Complete pump with actuator solenoid etc
you still looking for 13 inch wheels? Could do swap??


http://www.rayvernhy...folio/Juice/229

Edited by minisprint, 09 January 2011 - 10:54 AM.

[garrett3]

I have:

Complete pump with actuator solenoid etc
you still looking for 13 inch wheels? Could do swap??


http://www.rayvernhy...folio/Juice/229

Hi Mate

I have a few people showing interest with a purchase at the moment and even a guy in swededn so I will chanse up any cash deals first but If not will be in touch.

As of yet no deposits have been placed so a cash deal is still open to you if you are interested.

Thanks

[garrett3]

provisionally sold pending full payment

[glyn]

sorry off topic what wheels are they and what size. shame about your mini remember seeing it at MITP looked sweet

[garrett3]

sorry off topic what wheels are they and what size. shame about your mini remember seeing it at MITP looked sweet

They are 7x13 weller wheels made for VW. they were then redrilled from 100pcd to 101.6 for mini fitment.

I do think though that huddersfield does a similar wheel now?

[wilp99]

how much money you lookin to get for this setup?

[garrett3]

how much money you lookin to get for this setup?

Hi, I could have sold this for near double with the amount of emails and pm's from various sites.

Its now in a good home.

Cheers