4780 replies to this topic

[STA 93]

Have you got any chrome rings/surrounds that go inside the main dial holes; speedo and rev counter on the dash?

cheers

[MiniJosh92]

Hi,
Do you have a complete Clubman front end? Inner wings, outer wings, bonnet and front panels from a pre 1976 Clubman?

I Will pm you

[MiniJosh92]

Hey, do you have any audio equipment? E.g speakers parcel shelves. Also, what wheels do you have available, with tyres

Hi, I do have a few speakers. What size alloys are you after?

Have you got any chrome rings/surrounds that go inside the main dial holes; speedo and rev counter on the dash?

cheers

Afraid not.

[STA 93]

Do you have a black carpet board kit for the boot?

[Andywade]

Hi josh - any cat back exhausts with hanging brackets (the rubber hanger thingies) rc40 would be lovely but normal spi/mpi exhaust is fine

Edited by Andywade, 17 May 2011 - 12:59 AM.

[afhuey]

Any 998 unleaded heads and/or 1275 carb engines

[MiniJosh92]

Do you have a black carpet board kit for the boot?

Sorry none at the moment.

Hi josh - any cat back exhausts with hanging brackets (the rubber hanger thingies) rc40 would be lovely but normal spi/mpi exhaust is fine

Hi Andy, I have a brand new stainless rc40 injection one. I'll pm you in a min.

Any 998 unleaded heads and/or 1275 carb engines

Hi, yes & yes. Pm on it's way.

Josh.

Edited by MiniJosh92, 17 May 2011 - 07:59 AM.

[danny164]

Hi wondering if you have an ignition wiring loom for a carb engine Im going from spi to carb wondering if you have the wiring loom I need?? If you could get back to me that would be great thanks

[woodenman23]

Hi,

I didn't receive the PM you sent (about the complete clubman front end)

Could you tell me what sort of condition they are in etc...

Thanks Liam

[mini_legend]

Hi mate.
Any 1100 engines, or 1100 unleaded heads??
Decent estate rear doors ?
pair of Mk3 front doors? Good condition
Drivers 1992 door? As above lol
Clubman estate parts in general ??
Cheers
JK

[MiniJosh92]

Hi wondering if you have an ignition wiring loom for a carb engine Im going from spi to carb wondering if you have the wiring loom I need?? If you could get back to me that would be great thanks

Hi,

I didn't receive the PM you sent (about the complete clubman front end)

Could you tell me what sort of condition they are in etc...

Thanks Liam

Hi mate.
Any 1100 engines, or 1100 unleaded heads??
Decent estate rear doors ?
pair of Mk3 front doors? Good condition
Drivers 1992 door? As above lol
Clubman estate parts in general ??
Cheers
JK

Pm's on their way to all of you shortly

Thanks, Josh.

[Dark Angel]

Josh,
Do you have a set of rear pop out side windows with brackets, hinges and seals?

[andymini12]

Hi Josh, have you got any decent 998 engines at the minute ?
Oh and ben told me about your fan belt going again on the way home again lol.
Cheers Andy

[my first mini :o)]

Hi

I wondered if you would have a front wing (drivers side) for a Mini City E?

I've kind of put my hand through mine (not because im super human or anything, it was just pretty naff!)

No side repeater, just the full front wing if pos?

Thanks!

Emma

[MiniJosh92]

Josh,
Do you have a set of rear pop out side windows with brackets, hinges and seals?

Hi, yes I do, I'll pm you in a minute.

Hi Josh, have you got any decent 998 engines at the minute ?
Oh and ben told me about your fan belt going again on the way home again lol.
Cheers Andy

Hi Andy, I'll pm you about the engine & yeah was a bit of a pain but I think I found the cause - a big bit of rusty crud in the alternator pulley.

Hi

I wondered if you would have a front wing (drivers side) for a Mini City E?

I've kind of put my hand through mine (not because im super human or anything, it was just pretty naff!)

No side repeater, just the full front wing if pos?

Thanks!

Emma

Hi Emma, afraid not.

Josh.