4780 replies to this topic

[MiniJosh92]

hey wondering if you have a complete wiring loom for a 1275 carbed engine? also looking for the four bolts that attach the rear subframe, the ones that sit at the end of the sills on the heel board if you have either please let me know and costings, also postage to portsmouth also looking for a passenger side door in good condition i.e only needing touching up/painting ideally also if there is a pair of the same standard that would be good, looking for the internal hinged ones,
cheers man.

Hi, it's a no on the loom I'm afraid but yes on the subby bolts & doors. I'll pm you.

Thanks, Josh.

[JayBox]

Hi mate,

I am after a headlamp. I don't really know if there's many variations on headlamps so I don't know how specific I have to be. But I have got the black bowl in the car with the light itself, just need the glass, the bits to hold it all in plus the silver frame. Thanks

[maggies_minder]

would you by any chance have a bulb and its wiring for a 52mm TIM guage?

[MiniJosh92]

Hi mate,

I am after a headlamp. I don't really know if there's many variations on headlamps so I don't know how specific I have to be. But I have got the black bowl in the car with the light itself, just need the glass, the bits to hold it all in plus the silver frame. Thanks

Hi, I'll pm you in a sec

would you by any chance have a bulb and its wiring for a 52mm TIM guage?

I'll pm you as well in a min.

[MiniJosh92]

Do you have a half decent toe board/front floor/bulkhead that i can come and chop off a shell?

Quite possibly, I'll check tomorrow & let you know.

I've had a look & I'm afraid I don't have any at the moment.

[Mini Mad Drakeley]

hi,
bit of along shot but you wouldnt by any chance have a dunlop 4.5x10 reverse rim? i only need one and just the rim with no tyre

thanks, Adam

[MiniJosh92]

hi,
bit of along shot but you wouldnt by any chance have a dunlop 4.5x10 reverse rim? i only need one and just the rim with no tyre

thanks, Adam

Sorry can't help at the moment.

[Mini Mad Drakeley]

hi,
bit of along shot but you wouldnt by any chance have a dunlop 4.5x10 reverse rim? i only need one and just the rim with no tyre

thanks, Adam

Sorry can't help at the moment.

damn, can you let me know if you get any in please?

thanks

[MiniJosh92]

Will do.

[bettzy64]

Do you have a half decent toe board/front floor/bulkhead that i can come and chop off a shell?

Quite possibly, I'll check tomorrow & let you know.

I've had a look & I'm afraid I don't have any at the moment.

Okay thanks, any chance you could pm me if you get one in?

[MiniJosh92]

Do you have a half decent toe board/front floor/bulkhead that i can come and chop off a shell?

Quite possibly, I'll check tomorrow & let you know.

I've had a look & I'm afraid I don't have any at the moment.

Okay thanks, any chance you could pm me if you get one in?

certainly will

[Frank the Tank]

MiniJosh92,

Got the parcel today. I take it you poop bubble wrap as it took me twenty minutes to actually get to the item

Cheers for your help and no doubt I'll be bothering you for further parts soon.

Andy.

[Jonesy7]

im after some deep dish 10" wheels fairly cheap and some buckets with subframes if you have any

[maggies_minder]

would you by any chance have a bulb and its wiring for a 52mm TIM guage?

any luck with looking?

[MiniJosh92]

MiniJosh92,

Got the parcel today. I take it you poop bubble wrap as it took me twenty minutes to actually get to the item

Cheers for your help and no doubt I'll be bothering you for further parts soon.

Andy.

Hi Andy, thanks for letting me know.

Regards, Josh.

im after some deep dish 10" wheels fairly cheap and some buckets with subframes if you have any

Hi, I have various sets of 10" alloys & some bucket seats on subbys.

would you by any chance have a bulb and its wiring for a 52mm TIM guage?

any luck with looking?

Pm'd