4780 replies to this topic

[MiniJosh92]

 

Have you got passenger side window runners (good condition) and price

 

Thanks

The bottom two holders that the glass sits in

 

 

Yes, will pm you.

[grahama]

Have you got an ignition barrel complete with key for '83 1000 mayfair??

 

Graham

[MiniJosh92]

Have you got an ignition barrel complete with key for '83 1000 mayfair??

 

Graham

 

Yes, do you need the switch with wiring on the back too?

 

Cheers, Josh. 

[grahama]

Ideally the whole lot yes if in good nick. Can you pm me with a price and a pic please

[MiniJosh92]

Ideally the whole lot yes if in good nick. Can you pm me with a price and a pic please

 

Okay, yes I have them. If you want a picture, pm me your e-mail address and I will have to get one.

[leedhamj]

Do you have a pair of front disk hubs - ball joints/bearings/CV's if they are in very good condition (happy to refurb if not)? Don't need disks, drive flanges or callipers.

 

Thanks,

 

John

[Gazp]

Do you have a complete pedal assembly (all 3 pedals and what ever needed to mount them) for an 84 mayfair? If so how much with postage?

[MiniJosh92]

Do you have a pair of front disk hubs - ball joints/bearings/CV's if they are in very good condition (happy to refurb if not)? Don't need disks, drive flanges or callipers.
 
Thanks,
 
John

Hi John, so a pair of hubs with steering arms and cv joints?

[MiniJosh92]

Do you have a complete pedal assembly (all 3 pedals and what ever needed to mount them) for an 84 mayfair? If so how much with postage?

Just to confirm, that's without servo?

[Gazp]

Pretty sure it's none servo!

[leedhamj]

 

Do you have a pair of front disk hubs - ball joints/bearings/CV's if they are in very good condition (happy to refurb if not)? Don't need disks, drive flanges or callipers.
 
Thanks,
 
John

Hi John, so a pair of hubs with steering arms and cv joints?

 

 

Depends what you have, and what price

 

If they have known good CV's then I'll take them with, otherwise it's not worth the additional/postage costs as I'll replace them anyway. Ditto wheel bearings/ball joints, although I doubt it's worth the effort getting them out.

 

Technically I could re-use the steering arms from my drum hubs I think, so if they're knackered for some reason, that's OK.

 

John

[JetBlackEreg]

 

Do you have - 

 

Mk3 Wings L/H R/h

Mk3 front panel

Mk3 scuttle

Mk3 Valance

Mk3 rear bins/rear seat pockets

 

I don't have new panels I'm afraid.

 

okay do you have any of those panels with no rust or dents? they dont need to be new

[MiniJosh92]

Do you have a pair of front disk hubs - ball joints/bearings/CV's if they are in very good condition (happy to refurb if not)? Don't need disks, drive flanges or callipers.
 
Thanks,
 
John

Hi John, so a pair of hubs with steering arms and cv joints?

 
Depends what you have, and what price
 
If they have known good CV's then I'll take them with, otherwise it's not worth the additional/postage costs as I'll replace them anyway. Ditto wheel bearings/ball joints, although I doubt it's worth the effort getting them out.
 
Technically I could re-use the steering arms from my drum hubs I think, so if they're knackered for some reason, that's OK.
 
John

Okay, will pm you.

[MiniJosh92]

Do you have - 
 
Mk3 Wings L/H R/h
Mk3 front panel
Mk3 scuttle
Mk3 Valance
Mk3 rear bins/rear seat pockets

 
I don't have new panels I'm afraid.

okay do you have any of those panels with no rust or dents? they dont need to be new

Not that are worth saving I'm afraid.

[Higman96]

Hi I am looking for a drivers side door any colour, good condition. How much?