4 replies to this topic

[blackbelt1990]

'allow 'allow

I need to change my lambda sensor soon, usually I take the manifold off but this is the first time in ages I've had it leak free so I don't really want to disturb it. Had a quick feel up the bulkhead today and it's still as narrow as ever!

How does everyone else do theirs? I don't want to be going to mr break everything garage man... ha

Thanks, Ryan

[nicksuth]

It's a pig on an MPi, you can get the special socket on but can't get a turn on it, best to slacken off the manifold bolts and lift of the inlet manifold ?

[cooperdan]

I dont know what its like on the mpi's but on my spi i just cut the wire's off the end of the sensor put deep socket on it, removed the top radiator hose and manged to get a cm turn on the socket to loosen it and just unscrewed it with my hand...

[blackbelt1990]

I dont know what its like on the mpi's but on my spi i just cut the wire's off the end of the sensor put deep socket on it, removed the top radiator hose and manged to get a cm turn on the socket to loosen it and just unscrewed it with my hand...

Mines on the opposite side to that, looking at the brake servo.

And yeah, you can't get a turn on it with a ratchet!

Keep them coming... lol

Thankssss

[cooperdan]

Dammit!

Worth a shot,