99 replies to this topic

[analogue_radio]

I just put in the keywords, and then clicked 'search titles' under 'search where'

Easy peasy

[CobraV8]

If you look through my thread you will see my car started with tubbed rear arches, without flares, so you can see what they look like. Basically the outer curve of the back wheel arch follows the line of the actual inner wheel arch, ie the opening is bigger. It gives you about 2 inches clearance.

On the front, you have to cut between an inch to two inches of metal off the leading edge of the arch. In my case the wheel is pretty close to touching the end of the bumper, so... you need to trim a bit off.

anyway... click link in my signature and you will see some bits in there showing a low (but useable car).

[Rich.]

I have to admit, all the adding '+' and '-' infront of your search terms is all well and good, but i agree, most of the time it takes no notice and searches for any keyword in the search anyway. Sometimes it works and is very good, searchng for all the words in the search box, but most of the time it just looks for any word.

When you type in carbon +fiber +arches, you start to realise all may not be as it seams when it says 'Search results limited to the first 1000' !!

Rich

[hughzy69]

heres mine.

[Geehawk]

I have to admit, all the adding '+' and '-' infront of your search terms is all well and good, but i agree, most of the time it takes no notice and searches for any keyword in the search anyway. Sometimes it works and is very good, searchng for all the words in the search box, but most of the time it just looks for any word.

When you type in carbon +fiber +arches, you start to realise all may not be as it seams when it says 'Search results limited to the first 1000' !!

Rich

If you put in +carbon +fiber +arches you get a lot less than 1000 results at least I do.

Starting new, same subject posts just makes the search function seemingly worse because it will find so many more posts if people keep starting them.

Edited by Geehawk, 18 May 2010 - 10:33 AM.

[LOWRIDERHORNET]

[Down&Out]

I always use "search titles only" in a search, it comes up with unrelated rubbish otherwise.

Use that and youll find stuff.

[miniQ]

Gotta love them 10x6 wellers <3

[dazzler-pws]

more of my pictures here http://www.16vminicl...s.php?album=759

[Darjan1275]

mine.

[Racer_Pete]

few of mine....



tyres dont like people in the back though lol.

[RelyTM251]

this is mine at present... cant go any lower as it is... need to get the rear arch's tubed and move the exhaust up further. not has any real issues part from some sparks flying out the back on unevan roads.... that and the yellow and black speed bumps are now a no go.... oh the only little worry is the sump is only abou 3" off the road.... looking at a sump guard but then thats going to be evan cloaser to the ground..... plus had to cut aload away from the front arch....

What wheel arch trims are those?

[Carlzilla]

I want a clubman now

[Burnard]

mine.

I got that phone and that sumpguard

[mkmini81]

this is mine at present... cant go any lower as it is... need to get the rear arch's tubed and move the exhaust up further. not has any real issues part from some sparks flying out the back on unevan roads.... that and the yellow and black speed bumps are now a no go.... oh the only little worry is the sump is only abou 3" off the road.... looking at a sump guard but then thats going to be evan cloaser to the ground..... plus had to cut aload away from the front arch....

What wheel arch trims are those?

I think they are group 5's from mini spares... were an ebay bargin!!