99 replies to this topic

[MiniBonkerz]

Also what is needed to make the rear low? and is there a limit? please show pictures and give advice i may get mine slamed

[crazycoleman118]

to lower the rear is the same as the front, hi-lows.... and lowered dampers (preferably) to get it really low thought its likley you will have to tub the rear arches (cut away some of the side pannel, to the top of the arch) especially if you have wide wheels to give you more clearence

[MiniBonkerz]

how low can it sit as low as a 106 on its bump stops? arch mods i dont mind got my welder now and seem to have it down to a tee so bring the info on

[shorty]

hilos, lowered dampers, tubbed arches

or you could go the route of putting coilovers on and tubbing the arches

[surfblue63]

Here's one I spotted at Brooklands

[asmith88]

its getting the exhaust moved up and out of the way thats gona be my problem i think, is there a certain bracket that helps with this?

[mkmini81]

this is mine at present... cant go any lower as it is... need to get the rear arch's tubed and move the exhaust up further. not has any real issues part from some sparks flying out the back on unevan roads.... that and the yellow and black speed bumps are now a no go.... oh the only little worry is the sump is only abou 3" off the road.... looking at a sump guard but then thats going to be evan cloaser to the ground..... plus had to cut aload away from the front arch....

Edited by mkmini81, 05 May 2010 - 05:46 PM.

[ScottyBoi]

In the future search a topic before posting a copy of older topics!

Click Me!

[1293sleeper]

not the best picture.

Attached Files

•  6.JPG   1.18MB   44 downloads

[MiniBonkerz]

In the future search a topic before posting a copy of older topics!

Click Me!

Search button is useless to be honest but we have been there before

[ScottyBoi]

Search button is useless to be honest but we have been there before

Not if you know how to use it PROPERLY.

[mini-geek]

go on then how do you use it because I can't work it! if you stop everyone from posting about things new member wont be able to read topics to learn about minis DURR

as for lowering running 13's? probs won't be able to go that low to be honest also the rear has to be higher then the front,

[MiniBonkerz]

Please explain im sure there alot of people on here would love to know how to use it as we have so many problems

[MiniBonkerz]

go on then how do you use it because I can't work it! if you stop everyone from posting about things new member wont be able to read topics to learn about minis DURR

as for lowering running 13's? probs won't be able to go that low to be honest also the rear has to be higher then the front,

Thinking of dropping it down on 10's tnh been thinking that for a while proper mini look

[ROBBIE 1]

Heres mine

http://i657.photobuc...inimarch010.jpg

http://i657.photobuc...ifebuary054.jpg