9642 replies to this topic

[Readers14]

Hammered & swore at removing the LCB y-piece.  
Think I need to see if Mr Angle Grinder wants to come out & play.

Edited by Readers14, 18 March 2021 - 07:40 PM.

[Jarvis_SPI]

On the roll-over and spun on it's side. More holes found.....

[Readers14]

Hammered & swore at removing the LCB y-piece.  
Think I need to see if Mr Angle Grinder wants to come out & play.

Mr Angle Grinder was happy to play!

[JXC Mini GT]

Fitted a new 40 year old rev counter

 

[Ben_O]

Fitted a new 40 year old rev counter

Thats so weird..

I found a NOS boxed one in my spares stash and wondered if you

It might be of use to you!

[JXC Mini GT]

 

Fitted a new 40 year old rev counter

Thats so weird..

I found a NOS boxed one in my spares stash and wondered if you

It might be of use to you!

 

I wish I had spoken to you 1st Ben, this one cost £140

[Tones61]

Fitted pedestal shims,
Set valve clearances,
Ready for setting Vernia cam timing

Attached Files

•  IMG_1836.JPG   48.21K   3 downloads
•  IMG_1837.JPG   42.96K   1 downloads

Edited by Tones61, 19 March 2021 - 07:40 PM.

[Ben_O]

 

 

Fitted a new 40 year old rev counter

Thats so weird..

I found a NOS boxed one in my spares stash and wondered if you

It might be of use to you!

 

I wish I had spoken to you 1st Ben, this one cost £140

 

Wow! 

[LittleGreenMini]

I fitted plastic front arch liners from mini spars today. I was really impressed with the fit, needed a bit of fettling but for a non gen. part they’re great.
I’m hoping they protect the front end from the dreaded tin worm for many years to come!!

[Readers14]

Wrestled with the LCB manifold.

[cooperd70]

Wish I had owt to report, but due to lockdown restrictions I've not seen my car since last Oct! I hope it will start once I can return after restrictions are lifted.

Think she'll definitely need a good wash 'n polish as a minimum!!

[bae1994]

Drill and bored out the centre cap of my new steering wheel to fit a Bluetooth multi media remote to control the music on my phone (phone Bluetoothed to stereo)

 Screenshot_20210321-195146_Photos.jpg   24.73K   4 downloads

[goudoogje]

Drill and bored out the centre cap of my new steering wheel to fit a Bluetooth multi media remote to control the music on my phone (phone Bluetoothed to stereo)

Screenshot_20210321-195146_Photos.jpg

 

Thats looks nice!

[panky]

Had the carb apart to see why the car was difficult to start after a  week or so. Everything looked fine, nice and clean and debris free, the only thing I found was the choke didn't seem to be coming on fully so I adjusted the cable and boom started first time. The last time it was out was the MOT back in December when we wound the mixture back as it was running a bit rich, maybe this was disguising the the choke only being half on - we'll see in a few days when I try it again.

[Tones61]

Fitted refurbed rocker cover,
Getting my spare 45 ready,
Choice new MED parts to go on after cam timing set up then -
Ready for engine Dyno

Attached Files

•  IMG_1840.JPG   50.11K   1 downloads
•  IMG_1841.JPG   55.05K   1 downloads
•  IMG_1842.JPG   32.03K   0 downloads