9645 replies to this topic

[JXC Mini GT]

I took its photo lol
 

I had also fitted the dash cards and air vents, tidied up the top part of the grill and re fitted it, last few jobs before its first mot in 30 years on Tuesday

Looking good, when are the GT stripes going on?

[GT Jimmy]

I took its photo lol
 

I had also fitted the dash cards and air vents, tidied up the top part of the grill and re fitted it, last few jobs before its first mot in 30 years on Tuesday

Looking good, when are the GT stripes going on?

We do have them to put on, we were waiting for my nephew to polish it up first but he said today to just put em on and he'll work round them. Bit scared to do them to be honest

[SolarB]

Looked at my Mini that's been parked up for 6 months and wondered when I'll get time to pull out the engine and fix the gearbox

[Gcal]

Primed round front window frame ready for the top coat tomorrow before window goes back in

[Garf]

Purchased my Mini and drove 100 miles home! 

[sonikk4]

To all our new members. If you post on here or on any non technical thread your posts have to be approved until you post in a Technical Section.

 

This is to prevent unwanted spam, so please do not think we are ignoring you. Please ensure if you wish to contribute to the forum or seek technical advice then post in a technical section and we will then approve that post. After that you will be good to go.

 

Thank you from the Forum Team.

[bangermadness08]

Nothing. Been waiting for 2 weeks for my one to come back from the garage!!?

[Indy495]

First road test and he ran like a treat until we noticed the oil !!!!!!!

Attached Files

•  B7B1139E-A350-49B3-B7A1-786291045340.jpeg   151.01K   4 downloads

[Ben_O]

 

 

. Bit scared to do them to be honest

 

They are relatively painless to do. I prefer to stick them laying on my side. Use 1" tape to make the height and create a straight edge to work to and watch out for the letters and numbers of mini1275gt when you peel the paper off as the paper can seperate and leave a layer on the back of them so keep an eye out for that. I think every set I have done did that! 

[GT Jimmy]

. Bit scared to do them to be honest

They are relatively painless to do. I prefer to stick them laying on my side. Use 1" tape to make the height and create a straight edge to work to and watch out for the letters and numbers of mini1275gt when you peel the paper off as the paper can seperate and leave a layer on the back of them so keep an eye out for that. I think every set I have done did that!

Thanks Ben. The stripes before the resto were at different heights, didn't realise till I made a bit of garage art with the old door skins, they were a good half inch different, so never knew what was right lol

[Algordo1100]

Went for a drive home to Ribblesdale to see my mum. Glad that wheelie bin was there. I should pull my trousers up!

Attached Files

•  20200315_194817.jpg   83.12K   2 downloads
•  IMG-20200314-WA0005.jpg   99.61K   2 downloads

[panky]

Well you need somewhere to park your push bike

Edited by panky, 15 March 2020 - 11:02 PM.

[plantfitterRich]

Got it up on some axle stands, replaced the gear selector seal in the gearbox.
url="https://www.dropbox....191423.jpg?dl=0[/url]

Edited by plantfitterRich, 20 March 2020 - 09:26 PM.

[sc-em]

Went for a drive home to Ribblesdale to see my mum. Glad that wheelie bin was there. I should pull my trousers up!

That's a cracking b&w shot.

You have a series, too?

Edited by sc-em, 20 March 2020 - 09:09 PM.

[MrE812]

Had mine out of the garage.. under it's own power, oh yeah!!