9645 replies to this topic

[Minimadgaz1964]

Cleaned it and put it up for sale

Attached Files

•  83268944_2491585317825958_9079097767485243392_n.jpg   65.15K   1 downloads

Edited by Minimadgaz1964, 26 January 2020 - 11:43 AM.

[Wreckitralph1]

not today but made some box section inner cills  tied to a and b posts ready for a possible rwd set up

Attached Files

•  boxsill.JPG   48.81K   1 downloads

[Tones61]

Put up my mini speedo clock in garage ??

Attached Files

•  IMG_1521.JPG   31.43K   1 downloads

[need4speed]

New gearbox is in and it'll be back on the road during next week all things being equal. 

[Indy495]

Added the decals and pinstripes. 
 

nerve racking, but pleased with the result. 
 

also managed to fit the front screen without any dramas. 
 

Attached Files

•  39A06773-58C5-4997-98B5-358F85CAF2E1.jpeg   29.67K   5 downloads
•  50103E45-5C87-4827-91FF-E0A36A39D584.jpeg   34.91K   2 downloads

[ClassicAsh]

fitted a new park switch to the wiper motor, it had not parked as long I have owned the car but Its works perfect now. MOT next month so another job ticked off the list.

[Exmouth35]

Kissed it

[Surf1340]

Changed to 7.5” discs, new 10” wheels , just started with Group 2 arches , more than enough for today!

[Norfolk Boy]

Passed MOT only 3 minor advisories ?

[DavidN]

Clutch behaving in a most peculiar way going soft then hard etc. - so decided to change the 20 year old fluid. It's an MPI so lots of garbage to move to one side. ECU etc. In the end became frustrated with the whole deal so just shoved a load of towels under the bleed nipple and blew the old fluid out in a slightly more basic manner. Mate on the clutch yelling "down" me on the spanner....... It worked! Clutch is fine and not too much mess. 

[ClassicAsh]

Fitted a new CAT to it today, as well as new dizzy cap, rotor arm, new plug leads and also fitted some quick realise grill buttons to the grill, hopefully rocker gasket, sparks and oil change tomorrow.

[Indy495]

Started him up for the first time since owning him. 
After a couple of days head scratching and some great advice from members on here, it went......

sweet as a nut.

 

 

so pleased. 
 

 

[Ol timer]

Knocked up a rally style dash

Attached Files

•  IMG-20200212-WA0007.jpeg   48.7K   4 downloads
•  20200215_200509.jpg   63.54K   2 downloads

Edited by Ol timer, 15 February 2020 - 08:33 PM.

[Surf1340]

Changed discs and calipers to 7.5” for 10” wheels ?

[Tim61]

Finally got round to one of the first jobs I had identified when I bought it almost 18 months ago! The drivers seat looked ok but felt really soggy compared to the passenger side, so I removed the drivers seat, removed the upholstery from the base, and while it was out I repainted the lower frame where it had rubbed on the carpet protectors and gone rusty, fitted a new squab foam and webbing and replaced the cover, it now looks a feels like new! Being leather I decided to feed it with Autoglym leather care as it looked very dry and dull, it looked really nice until it fully dried and soaked in and now doesn't look much different than before!

 

I have now order a set of carpet protectors as they have cracked and broken, so that's the next job but it looks like the entire carpet needs to come out.