9650 replies to this topic

[leyland73]

Fitted a wired by Wilson headlamp relay kit. Great piece of kit and much safer way to operate headlamp circuits with the 4 fuses and 2 relays. Very pleased. Then spent a few hours with a tub of poor boys alloy wheel wax and gave the wheels a once over.

[ukcooper]

Sold her

[Bike1769]

No sc-em. I've ordered the full drum to 7.5 S disc conversion.

Edited by Bike1769, 08 April 2019 - 12:20 PM.

[sc-em]

Ah right/ Sorry I didn't register the fact you had drums on the front,

[Bike1769]

Just added minifin drums to the shopping list.if nothing else they'll space the rear wheels out a bit.

[sc-em]

Aye. A good idea.

I have put the back of my Mini on the jig ready to do the front later in the week and was given a nice Cooper S (I think) tacho by my mate. I came with an Autotune Gemini he has bought.

 

Why are my photos always sideways?

Attached Files

•  IMG_1246.JPG   97.6K   1 downloads
•  IMG_1255.JPG   130.7K   0 downloads

[SuperDeLuxeNick]

Oil and Filter change.

 

Fixed my number plate on properly.

[minifreek1]

Sorted rear in bumper lights for the bodykit :)

[Alice Dooper]

Went Cooper S Works on an MPI.

Makes a lovely noise now. Managed to set off the alarm on my wife’s Bini with it. Result!!

Attached Files

•  9B4925A0-37EB-46DB-B5E3-8638558EFFE8.jpeg   107.81K   5 downloads

[minifreek1]

Will be sorting out the n/s cill today/tomorrow and the tackling the floor to start repairs on it.

[minifreek1]

And a repair on the n/s inner arch..

Happy days...

[JXC Mini GT]

Took the Mini over to Ben at Mill Road Garage to replace the drivers door and some other minor bits, it was nice to see the Mini in good company with 3 other Minis in the workshop

[Cooperman]

Fitted a replacement LH top arm with new bushes and pin. This replaced an arm which had a 10mm damper shaft as a replacement for the 3/8" UNF. The 3/8" one snapped on a rally in 2004 and now that I have bought the car back I have put the arm back to standard size. 

Also completed the re-skinning of the LH door, sorted some dents in the RH door and the boot-lid.

Next job is complete paint prep and re-spray the car. Then fit the 7.5" discs and replace the lower arm and tie-bar bushes, steering rack gaiter and inner drive shaft gaiter.

It's coming on well now.

[Steve220]

Clutch and flywheel balanced, reinstalled and car is back on 4 wheels!

[Shooter63]

Looked underneath and yup still leaking oil.

Shooter