9650 replies to this topic

[minitravellerman]

Put mine up for sale 

[Ol timer]

Ordered one of these
https://www.123ignit...-bluetooth.html
Can't wait!

Would love to hear how well it works out...

Me too

[harrythehat]

Repainted an original (new) set of rear seam trims, couldn't put up with fit of patent parts

[Chris.Williams]

Fitted new fibre glass bonnet and boot lid painted matt black look good against the ford Rosso red 30 years since me and bro painted it just got to fit the new arches now matt black also of course

Pictures?

[Chris.Williams]

Ordered one of these
https://www.123ignit...-bluetooth.html
Can't wait!

Would love to hear how well it works out...

Me too

Engine should be back in and run by months end, will have an update on it’s performance then. It’s a beautiful piece of kit. Everyone that’s seen it wants one ha ha

[cal844]

Done a compression test on our 998 and my estate, good figures considering the age and mileage on both.

Test performed on cold engines with throttle closed and plugs removed... I didn't do wet tests

My estate (1275 with approx 55k miles) was 160 on all 4 pots


The 998 with an indicated 104k miles has varied readings

#1 was 130
#2 was 145
#3 was 150
#4 was 155

I think the readings may be slightly low but both engines need a decoke and valve grind

[vyruskiller]

Took Percy out for approx 60 mile drive around Leicestershire’s country roads - where I found out my new water pump, hoses and rad have a leak somewhere with me have to top up the rad when I stopped at the various pubs.

Only had to top with about a pint each time as seemed like then water was being held everywhere other that the rad itself

[nicklouse]

put a few bits back on it.

[panky]

Took delivery of a new brake servo. Had a bit of a nasty experience the other night on the way home from a pub meal when the brakes went a bit strange. Checked the fluid level the next morning and it was empty   Went round all the cylinders and pipes with no sign of a leak - pulled the vac pipe off the manifold and brake fluid dripped out, probably the cause of the slight burny exhaust smell I get with the windows open. New servo to be fitted tomorrow.

Edited by panky, 09 August 2018 - 08:12 PM.

[cal844]

Took delivery of a new brake servo. Had a bit of a nasty experience the other night on the way home from a pub meal when the brakes went a bit strange. Checked the fluid level the next morning and it was empty Went round all the cylinders and pipes with no sign of a leak - pulled the vac pipe off the manifold and brake fluid dripped out, probably the cause of the slight burny exhaust smell I get with the windows open. New servo to be fitted tomorrow.

Change the master cylinder too, had this on our 88 998 Mayfair

[Verderad]

Removed a few more patches from drivers footwell / flitch, fettled the replacement half floor. Clearly the repair of choice through 80's, 90's & 00's was to just go over the top of previous repair. 4 thick in places.

[panky]

 

Took delivery of a new brake servo. Had a bit of a nasty experience the other night on the way home from a pub meal when the brakes went a bit strange. Checked the fluid level the next morning and it was empty Went round all the cylinders and pipes with no sign of a leak - pulled the vac pipe off the manifold and brake fluid dripped out, probably the cause of the slight burny exhaust smell I get with the windows open. New servo to be fitted tomorrow.

Change the master cylinder too, had this on our 88 998 Mayfair

 

Master is fairly new so hopefully that will be OK

[NZMini1275]

Ordered one of these
https://www.123ignit...-bluetooth.html
Can't wait!

Would love to hear how well it works out...

Me too

Engine should be back in and run by months end, will have an update on it’s performance then. It’s a beautiful piece of kit. Everyone that’s seen it wants one ha ha

Got mine in and sorted very nice quality

[johnR]

 

 

 

Ordered one of these
https://www.123ignit...-bluetooth.html
Can't wait!

Would love to hear how well it works out...

Me too

Engine should be back in and run by months end, will have an update on it’s performance then. It’s a beautiful piece of kit. Everyone that’s seen it wants one ha ha

 

I like the anti theft feature built in to this - I was going to get a 123 for my new engine - looks like this may be the one

[wombatjock]

I refitted the front subframe using new bushes and mounts, then clamped on the new n/s inner wing. It's going to take me a while to be sure of the new wing alignment. If only it came with the hinge holes...