9650 replies to this topic

[Dannyboolahlah]

Washed it and took it for a drive :-O

[bae1994]

Fitted new engine mounts and a new water pump while the radiator was out,

Days like these where I wish I had a garage to work in... Too bloody hot

[vyruskiller]

New rad fitted with water pump and some silicone hoses

I was not prepared for what a bugger of a job it would be, spinning captive nut, damaged cowl due to that - as for how little room there is due to the new rad being thicker - I was not prepared for that!

Also lost 5 stone in the wooden garage phew ?

[Steve220]

Started it!

[Dannyboolahlah]

Went for some petrol ready to use it tomorrow... took me 2 hours haha. Damn rural roads.

[DeanP]

Finished doing some last final adjustments today before Old Skool Mini's pick it up in the morning and whisk it away for a full spray job. :)

[Readers14]

Dropped the oil & put in some fresh Valvoline VR1, with a new oil filter too.

[alex-95]

Stripped my gearbox that was crunching from 4th to 3rd. Guess that should have been replaced when it was taken apart checked and put back together 8 miles ago (not by me)

 

[RichMPiBlue]

Pair of new genuine rear Mini Cooper mudflaps fitted today.

 

 

[davej]

Took it for an MOT, passed with no advisories 

[Chris.Williams]

Fitted the crank pulley, starter motor and set my tappets. Rocker cover on, picked up my new radiator brackets for the bottom points and had a mate drop in after work and offer to make a stainless top radiator shroud!
Minto......
My bottom brackets will also house my charge cooler radiator.
Almost looks like a car again ?

Edited by Chris.Williams, 31 July 2018 - 07:40 AM.

[JXC Mini GT]

Replaced my window runners and gave it a wash ready to take it out for a nice drive in the sun, the next job ion the list is to get the vents fitted to the dash and ducts under the wings

Attached Files

•  55D23102-1D40-4829-896A-ED40B5130F54.jpeg   86.61K   2 downloads

[Ben_O]

Replaced my window runners and gave it a wash ready to take it out for a nice drive in the sun, the next job ion the list is to get the vents fitted to the dash and ducts under the wings

All swapped over ok John?

[Chris.Williams]

Have the engine on the bench while mucking about with radiator ideas, decided to figure out my hose lines....
 B3358EC5-AD2A-48D9-8CFC-AD20DB7B2368.jpeg   44.71K   1 downloads
 B8202114-7728-45C8-93E2-B3790D85A9B6.jpeg   51.34K   1 downloads
 8B5950A0-FB5A-4EDA-86F8-6258AD9BAC67.jpeg   44.87K   3 downloads

Pretty much follows the factory line but takes into account the charger belt.

[JXC Mini GT]

 

Replaced my window runners and gave it a wash ready to take it out for a nice drive in the sun, the next job ion the list is to get the vents fitted to the dash and ducts under the wings

All swapped over ok John?

 

Hi Ben

 

All went well, I see what you were talking about regarding the condition of the door/frame, I will have to plan another visit to you in order to sort it out.

 

John