9706 replies to this topic

[cp2708]

Got abused by a person in a Yaris at the petrol station then fixed the wiper park fault. Good times.

[cal844]

Got abused by a person in a Yaris at the petrol station then fixed the wiper park fault. Good times.

Get them in the tight n Twisties 😉

[CityEPete]

Mot passed with no advisories

[paul50]

Booked mini into the rolling road. Peter Baldwin can work his magic

[paul50]

Hit a chicken and dented the grill.

[leyland73]

Fitted new wiper arms, replaced choke cable, fixed 3 leaking floor grommets, refitted drivers side door lock barrel after it came out in my hand last time I locked the car, busy day all round. Choke cable has to be as fiddly as a master cylinder clevis pin, especially trying to fit the tiny nut to the back of the bracket fixed to the lower dash rail. Removing the centre console had its challenges too, still all done now, no need for a clothes peg for the choke anymore!

Attached Files

•  3504986A-D04A-4D19-82C2-D807773CB541.jpeg   32.36K   0 downloads
•  67A7E585-0341-4DEA-9D07-F602A456692B.jpeg   36.57K   2 downloads

[Chris.Williams]

Hit a chicken and dented the grill.

Done the same thing but with a hare.... dented the front valance and number plate. Hard little buggers.

[Big Sam]

Smacked the rear subframe with many different pieces of wood in an attempt to get it to fall off. It just isn't happening. I know i've got all the bolts!

[RichMPiBlue]

Fitted a MPi engine stabiliser kit yesterday from DSN Classics.

 

However, we had to grind the flats of the nuts supplied as they didn't a-line up properly with the holes. A bit of a ball-ache and a stupid mistake from them, but we got there in the end. Does its job well so I'm happy---and looks cool! 

 

Edited by RichMPiBlue, 10 May 2018 - 06:10 PM.

[Angusdog]

 

In preparation for rust repairs and bare metal professional respray.

Edited by Angusdog, 12 May 2018 - 08:59 AM.

[MacGyver]

Stil fighting with the cones... Who said fitting Hi-lo's made reassembly easier?!

[Chris.Williams]

Disassembled my new cylinder head, just cause haha, reassembled and painted it.

[JXC Mini GT]

Attended the Amberley Mini day, they were expecting 100 Mini's but I think only half that total attended, here's a few photos I took.

Edited by JXC Mini GT, 12 May 2018 - 05:30 PM.

[Northernpower]

Attended the Amberley Mini day, they were expecting 100 Mini's but I think only half that total attended, here's a few photos I took.
https://imgur.com/tPILv4B
https://imgur.com/HWHP3nB
https://imgur.com/R0HXC6s
https://imgur.com/ohHF1nS
https://imgur.com/67XwXtG
https://imgur.com/hBEIsHF
https://imgur.com/WcXReKO
https://imgur.com/nw4z6n5
https://imgur.com/l9bczrx
https://imgur.com/YQdQWLw

You seem to have uploaded them incorrectly, did you upload them on a pc?

[Kemo]

bought some more bits to rebuild the gearbox, still waiting on central pick up pipe to come back in stock haha!