Fitted carbon boot lid.
IMG_3307.JPG 31.45K
4 downloads
Edited by Raggedroy, 12 September 2017 - 07:34 PM.
Posted 12 September 2017 - 07:32 PM
Fitted carbon boot lid.
IMG_3307.JPG 31.45K
4 downloads
Edited by Raggedroy, 12 September 2017 - 07:34 PM.
Posted 13 September 2017 - 08:38 PM
Posted 14 September 2017 - 05:24 PM
Edited by Lt-SilverDragon, 14 September 2017 - 05:25 PM.
Posted 14 September 2017 - 09:49 PM
washed it, it then rained 5 mins afterwards.
Posted 15 September 2017 - 07:37 AM
Hunted down two outer CV rubber boots, fitted one in 10 mins, fitted the second one in 90 minutes because nothing's ever straight forward.
New exhaust didn't arrive and today is the deadline to avoid a second MOT test fee, so I bodged on an old RC40. The middle box doesn't fit under my car, so I had to drop the whole exhaust a couple of inches, so I fashioned some new exhaust hangers with a coat hanger. It only has to survive 100m to the garage and 100m back, but it's surprisingly solid.
Put the wheels back on, got it off stands and started it up. Wondered how a bonnet pin could have vibrated loose in under 60s and went looking for some locktite.
Took it to the garage to be checked today.....
Posted 15 September 2017 - 05:28 PM
Washed it again. Didn't rain this time so all is good.
Posted 15 September 2017 - 07:52 PM
MOT again passed and no advisories,, Happy Days
Posted 16 September 2017 - 10:12 PM
Hunted down two outer CV rubber boots, fitted one in 10 mins, fitted the second one in 90 minutes because nothing's ever straight forward.
New exhaust didn't arrive and today is the deadline to avoid a second MOT test fee, so I bodged on an old RC40. The middle box doesn't fit under my car, so I had to drop the whole exhaust a couple of inches, so I fashioned some new exhaust hangers with a coat hanger. It only has to survive 100m to the garage and 100m back, but it's surprisingly solid.
Put the wheels back on, got it off stands and started it up. Wondered how a bonnet pin could have vibrated loose in under 60s and went looking for some locktite.
Took it to the garage to be checked today.....
Posted 17 September 2017 - 09:26 AM
Posted 17 September 2017 - 08:34 PM
Fitted the last spare heater matrix I had, hopefully this one wont leak
Posted 17 September 2017 - 11:20 PM
Posted 19 September 2017 - 12:15 PM
Noticed an oil leak on the garage floor...... looks like the head gasket again at the corner and running down the engine block.....Here we go again !
Posted 19 September 2017 - 03:02 PM
Went for a quick drive around before I started to hunt the oil leak, 2 miles down the road the seat diaphragm split, so that's another job to do as it feels like I am driving sat on a toilet now.
Posted 22 September 2017 - 08:08 PM
sorted out my trigger wheel/pulley.
Had the "teeth" CNC'd on this fixture, so the key way inline with the missing tooth.
Then I put it on the lathe and removed some of the meat so that the sensor constantly sense the steel.
Posted 22 September 2017 - 09:29 PM
0 members, 3 guests, 0 anonymous users