9702 replies to this topic

[Readers14]

Is it comfy

Shall let you know when it arrives!

[Jarvey]

Fitted these articulated bonnet hinges over the weekend!
 
20170826_2143362.jpg

fantastic.. do the hinges also hold the bonnet up?

I took this picture before I fitted the gas struts, at this stage it was like 7 hours of fitting haha. But yeah they did to an extent, although I wouldn't use them in the vertical position without the struts.

[panky]

New front doughnut arrived from Mini spares this morning

I'm getting good at fitting them now - 1 hour flat, I had already taken the damaged one off though  Took it for a spin and all good, still firm but a much more comfortable ride, same height on both sides and I didn't bang my head on the roof going slowly over a speed bump.

Edited by panky, 29 August 2017 - 08:53 PM.

[JXC Mini GT]

Took my Mini to SETyres (Tunbridge Wells Branch) for 2 new 165/60x12 Yokohama tyres to be fitted, not only were they the cheapest price at £131.60 (including valves, balancing and disposal of old tyres) but they were extremely careful over the whole process, the supervisor asked where I would like the car jacked up, whether I wanted chrome valves and was there a preferred torque for the wheel nuts and instructed the fitter to be careful with the polished rims. The job was completed promptly and courteously with no damage to the wheels. 

[panky]

Fitted a new clip to the bonnet prop, that should stop it dropping on my head

[RichMPiBlue]

New genuine Mini Spares front and rear stainless steel bumpers fitted. 

 

 

[Chesty2925]

 IMG_7935.JPG   65.51K   1 downloads  IMG_7937.JPG   48.57K   1 downloads
I made some custom skateboard wheel door winders

[Laurie]

I finally received my spares for my 'new' bonnet, just the push I needed to carry on.
The donor spares are up for sale now:D

[Kombi]

It's about time! I did a thing!
 

 
I'm going to need 100% more flares.
 

[panky]

Went and got the tracking set up............that's better

[RichMPiBlue]

New MK3 11 slat black grille and full surround kit fitted.

 

[/url]

 

 

[panky]

Walked past it a lot when I was working on my daughters car

[bae1994]

New brake servo and master cylinder after work, only took a couple of hours with bleeding.

Went better than I expected

[b_sdaddy]

Stuck door stickers on for this weekends' trek to the Revival at Goodwood. Only 325km from Diksmuide, Belgium!

Attached Files

•  goodwood mini.JPG   48.65K   0 downloads

[Mini Waco]

New MK3 11 slat black grille and full surround kit fitted.

 

[/url]

 

 

Looks good Rich....